Claus Guttesen wrote: >>I am having a problem with the isp driver seeing a StorageTek disk >>array LUNs. I am directly attaching to the array and everything works >>find as long as I plug into the A controller on the array. When I >>connect up to the B controller, I can not see any of the LUNs >>advertised. The QLogic firmware can see the LUNs. The only difference >>I can see are that the LUNs start at 0 on the A side and at 3 on the B >>side. > > > In 5.x (and probably still applies to 6.x) LUN's have to start at 0 in > order to be visible. So you have to change or LUN-mask so they start > at 0.
And in 4.x. This behaviour is unlikely to change since the standards only require checking for device at lun 0 (and if found then scanning for more). You can use camcontrol to rescan the bus (or device) to make it visible. -- tonym _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
