Hi
After my previous email about the SETFEATURES SET TRANSFER MODE timeout
on (msgid [EMAIL PROTECTED] , 17 March 14:18 GMT + 2 on
freebsd-stable), I installed FreeBSD 6.1 BETA 4 and upgraded to a
6-STABLE kernel, running the box in 'safe' mode to do so. I now,
however, get a slightly different error message:
ad4: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout -
completing request directly
ad4: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout -
completing request directly
ad4: WARNING - SETFEATURES ENABLE RCACHE taskqueue timeout - completing
request directly
ad4: WARNING - SETFEATURES ENABLE RCACHE taskqueue timeout - completing
request directly
ad4: WARNING - SETFEATURES ENABLE WCACHE taskqueue timeout - completing
request directly
ad4: WARNING - SET_MULTI taskqueue timeout - completing request directly
ad4: FAILURE - WRITE_DMA timed out LBA=32804495
(The address after LBA is not always the same)
This is with ad4 as a Seagate ST320423A on a Promise PDC20262 UDMA66
controller.
Any suggestions?
Thanks,
Peter
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"