I tried a different setup - using a spare drive on the boards ata
controller, booting off that - and attaching a single drive to the
SX4060 after cvsuping to 6.1 Pre-5
Due to the boards buggy ServerWorks ROSB4 ata controller, I've set
hw.ata.ata_dma=0 in loader.conf (This might have helped matters too I
guess).
So with this setup, it boots (after complaining somewhat).
Now that its booting I'm in a position to try patches/hacks etc, so any
suggestions for stuff to try are welcome!
Cheers
Mark
A dmesg is here:
http://homepages.paradise.net.nz/markir/download/dmesg-istral
Some interesting bits:
Mar 2 20:29:27 istral kernel: atapci1: <Promise PDC20621 UDMA100
controller> po
rt 0xe800-0xe8ff,0xe400-0xe4ff,0xe000-0xe0ff mem
0xfeb00000-0xfebfffff,0xfeaf800
0-0xfeafffff irq 23 at device 3.0 on pci1
Mar 2 20:29:27 istral kernel: pci1: child atapci1 requested type 4 for
rid 0x20
, but the BAR says it is an memio
.....
Mar 2 20:29:27 istral kernel: ad8: setting PIO4 on PDC20621 chip
Mar 2 20:29:27 istral kernel: ata4: reiniting channel ..
Mar 2 20:29:27 istral kernel: ata4: reset tp1 mask=03 ostat0=50 ostat1=00
Mar 2 20:29:27 istral kernel: ata4: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
Mar 2 20:29:27 istral kernel: ata4: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
Mar 2 20:29:27 istral kernel: ata4: reset tp2 stat0=50 stat1=00
devices=0x1<ATA
_MASTER>
Mar 2 20:29:27 istral kernel: ata4: reinit done ..
Mar 2 20:29:27 istral kernel: ad8: FAILURE - SETFEATURES ENABLE RCACHE
timed ou
t
Mar 2 20:29:27 istral kernel: fdc0: output ready timeout
Mar 2 20:29:27 istral kernel: fdc0: input ready timeout
Mar 2 20:29:27 istral kernel: fdc0: input ready timeout
Mar 2 20:29:27 istral kernel: fdc0: output ready timeout
Mar 2 20:29:27 istral kernel: fdc0: input ready timeout
Mar 2 20:29:27 istral kernel: fdc0: input ready timeout
Mar 2 20:29:27 istral kernel: fdc0: output ready timeout
Mar 2 20:29:27 istral kernel: fdc0: input ready timeout
Mar 2 20:29:27 istral kernel: fdc0: input ready timeout
Mar 2 20:29:27 istral kernel: fdc0: output ready timeout
Mar 2 20:29:27 istral kernel: fdc0: input ready timeout
Mar 2 20:29:27 istral kernel: fdc0: input ready timeout
Mar 2 20:29:27 istral kernel: ata4: reiniting channel ..
Mar 2 20:29:27 istral kernel: ata4: reset tp1 mask=03 ostat0=50 ostat1=00
Mar 2 20:29:27 istral kernel: ata4: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
Mar 2 20:29:27 istral kernel: ata4: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
Mar 2 20:29:27 istral kernel: ata4: reset tp2 stat0=50 stat1=00
devices=0x1<ATA
_MASTER>
Mar 2 20:29:27 istral kernel: ata4: reinit done ..
......
Mar 2 20:29:27 istral kernel: ad8: WARNING - SETFEATURES SET TRANSFER
MODE task
queue timeout - completing request directly
Mar 2 20:29:27 istral kernel: ad8: setting PIO4 on PDC20621 chip
Mar 2 20:29:27 istral kernel: ad8: WARNING - SETFEATURES ENABLE RCACHE
taskqueu
e timeout - completing request directly
Mar 2 20:29:27 istral kernel: ad8: WARNING - SETFEATURES ENABLE WCACHE
taskqueu
e timeout - completing request directly
Mar 2 20:29:27 istral kernel: ad8: WARNING - SET_MULTI taskqueue
timeout - comp
leting request directly
Mar 2 20:29:27 istral kernel: ata4: reinit done ..
Mar 2 20:29:27 istral kernel: ad8: TIMEOUT - READ retrying (0 retries
left) LBA
=0
Mar 2 20:29:27 istral kernel: ata4: reiniting channel ..
Mar 2 20:29:27 istral kernel: ata4: reset tp1 mask=03 ostat0=58 ostat1=00
Mar 2 20:29:27 istral kernel: ata4: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
Mar 2 20:29:27 istral kernel: ata4: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
Mar 2 20:29:27 istral kernel: ata4: reset tp2 stat0=50 stat1=00
devices=0x1<ATA
_MASTER>
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
