> Cristiano Deana writes:
> [ Charset ISO-8859-1 unsupported, converting... ]
> | 2006/3/1, Paul Saab <[EMAIL PROTECTED]>:
> | > works fine
> |
> | I got:
> | Failed to open driver node /dev/megadev0
>
> Make sure you have amr_linux. kldload amr_linux.ko. Then you should
> get a /dev/megadev0. It also works in a static kernel. You might
> want to do an ls -l of /dev/megadev0. This is only available
> in FreeBSD 6.1 and -current it is not in FreeBSD 6.0. The changes
> will drop into FreeBSD 6.0 though.
i'm getting:
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.1-PRERELEASE #3: Mon Feb 27 10:23:29 IST 2006
...
module_register_init: MOD_LOAD (amr_linux, 0xffffffff805f1b00, 0) error 6
ad4: 286168MB <WDC WD3000JD-00KLB0 08.05J08> at ata2-master SATA150
ad6: 286168MB <WDC WD3000JD-00KLB0 08.05J08> at ata3-master SATA150
ar0: 572072MB <LSILogic v3 MegaRAID RAID0 (stripe 16 KB)> status: READY
ar0: disk0 READY using ad4 at ata2-master
ar0: disk1 READY using ad6 at ata3-master
and no /dev/megadev0
maybe because:
[EMAIL PROTECTED]:31:2: class=0x01048f card=0x34518086 chip=0x25b08086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '6300ESB Serial ATA Controller (RAID mode)'
class = mass storage
subclass = RAID
danny
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
