Hi,
We have a problem with atheros (D-Link AG530) using FreeBSD 6.1-BETA2 in
client mode to associte our production bridge (mode 11b), this card
change to associated state after a long time (9min):
ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 172.16.23.2 netmask 0xffffff00 broadcast 172.16.23.255
ether 00:13:46:9a:29:13
media: IEEE 802.11 Wireless Ethernet autoselect mode 11b (DS/11Mbps)
status: associated
ssid "WAVE BMARX" channel 3 bssid 00:02:2d:8d:b3:5c
authmode OPEN privacy ON deftxkey 1 wepkey 1:40-bit txpowmax 18
protmode CTS burst bintval 100
it was configurated using this script:
ifconfig ath0 inet 172.16.23.2 netmask 255.255.255.0 ssid 'WAVE BMARX' \
wepmode on wepkey 0x3132333435 weptxkey 1 media autoselect mode 11b
Using same hardware and script but running FreeBSD 5.4, this card is
associated immediately.
What is happening when using FreeBSD 6.1-BETA2? Is there any problem
with mode 11b and atheros driver?
Our bridge is another PC running StarOS (www.stratos.com) with orinoco
pccard (802.11b). This is working fine when using clients running
FreeBSD 5.4, but we can't upgrade this stations clients to 6.1-BETA2.
From FreeBSD 6.1-BETA2:
# sysctl dev.ath
dev.ath.0.%desc: Atheros 5212
dev.ath.0.%driver: ath
dev.ath.0.%location: slot=8 function=0
dev.ath.0.%pnpinfo: vendor=0x168c device=0x0013 subvendor=0x1186
subdevice=0x3a14 class=0x020000
dev.ath.0.%parent: pci0
dev.ath.0.smoothing_rate: 95
dev.ath.0.sample_rate: 10
dev.ath.0.countrycode: 0
dev.ath.0.regdomain: 16
dev.ath.0.debug: 0
dev.ath.0.slottime: 20
dev.ath.0.acktimeout: 48
dev.ath.0.ctstimeout: 48
dev.ath.0.softled: 0
dev.ath.0.ledpin: 0
dev.ath.0.ledon: 0
dev.ath.0.ledidle: 2700
dev.ath.0.txantenna: 0
dev.ath.0.rxantenna: 1
dev.ath.0.diversity: 1
dev.ath.0.txintrperiod: 5
dev.ath.0.diag: 0
dev.ath.0.tpscale: 0
dev.ath.0.tpc: 0
dev.ath.0.monpass: 24
From FreeBSD 5.4 we have this:
# sysctl dev.ath
dev.ath.0.%desc: Atheros 5212
dev.ath.0.%driver: ath
dev.ath.0.%location: slot=8 function=0
dev.ath.0.%pnpinfo: vendor=0x168c device=0x0013 subvendor=0x1186
subdevice=0x3a14 class=0x020000
dev.ath.0.%parent: pci0
Paulo Fragoso.
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
