On Tue, Feb 14, 2006 at 08:07:48PM +1100, Peter Jeremy wrote: > On Mon, 2006-Feb-13 19:44:07 -0800, Joseph Olatt wrote: > >I've been having kernel panics when I use one particular USB flash drive > >(LEXAR MEDIA JUMPDRIVE2, rev 2.00/1.25, addr 2) with FreeBSD > >6.1-PRERELEASE (See [1] below). All I have to do to get the kernel to > >panic is to insert and remove the drive from the USB port 2 or 3 times > > You left out details of the panic and backtrace. > > >This problem happens only if the "ehci" device is enabled in the kernel > > Note that echi(4) states: > BUGS > The driver is not finished and is quite buggy. > > >So I suspect that it is a problem with the "ehci" driver. Unfortunately > >I'm not being able to get a crash dump as the system starts dumping and > >then freezes. > > Try adding the following options so you can get backtraces without dumps: > options KDB > options KDB_TRACE > options DDB >
Using Peter Jeremy's suggestion, I was able to get a backtrace. Since I couldn't figure out an easier way to capture the backtrace, I transcribed by hand from the console. Here is the output: ### Begin Backtrace ### dt> bt Tracing pid 39 tid 100030 td 0x32bcc00 probedone(c3a56800, c3606000) at probedone+0x4b2 camisr(c0926a78) at camisr+0x27d ithread_loop(c33c3400, d44aad38) at ithread_loop+0x159 fork_exit(c0631330, c33c3400, d44aad38) at fork_exit+0x70 fork_trampoline() at fork_trampoline+0x8 --- trap 0x1, eip = 0, esp = 0xd44aadbc, ebp = 0 --- ### End Backtrace ### I still wish I could get the system to dump and save the core. I still haven't figured out why the system freezes in the middle of a core dump. It looks like the the function "probedone" is defined in: /usr/src/sys/cam/cam_xpt.c I'm not familiar with DDB. If anyone would like more information, I'll be glad to get the system to panic again and follow your instructions. regards, joseph _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
