Joseph Koshy wrote:
Kevin,
Any ideas on this weird issue?
Please also post the output of dmesg(8) and whatever
network related statistics that you have from netstat,
ifconfig etc. What is the OS on the SQL server
box?
--
FreeBSD Volunteer, http://people.freebsd.org/~jkoshy
The www and sql box are both freebsd6 using the exact same image as they
are the exact same hardware.
i've tried with polling disabled and enabled neither helps.
ifconfig:
rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=48<VLAN_MTU,POLLING>
ether 00:13:d4:b1:ef:ce
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
netstat -m:
2177/1093/3270 mbufs in use (current/cache/total)
2087/549/2636/25600 mbuf clusters in use (current/cache/total/max)
45/424/6656 sfbufs in use (current/peak/max)
4718K/1371K/6089K bytes allocated to network (current/cache/total)
0 requests for sfbufs denied
0 requests for sfbufs delayed
828281 requests for I/O initiated by sendfile
6923 calls to protocol drain routines
dmesg:
All buffers synced.
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-STABLE #0: Thu Jan 26 12:12:18 PST 2006
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/AYA
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.66GHz (2676.15-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf34 Stepping = 4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x441d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,<b14>>
real memory = 1065025536 (1015 MB)
avail memory = 1037479936 (989 MB)
ACPI APIC Table: <A M I OEMAPIC >
ioapic0 <Version 2.0> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <A M I OEMRSDT> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82915G (915G GMCH) SVGA controller> port 0xb800-0xb807 mem
0xdfe00000-0xdfe7ffff,0xc0000000-0xcfffffff,0xdfe80000-0xdfebffff irq 16
at device 2.0 on pci0
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
pci0: <multimedia> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib1
pci0: <serial bus, USB> at device 29.0 (no driver attached)
pci0: <serial bus, USB> at device 29.1 (no driver attached)
pci0: <serial bus, USB> at device 29.2 (no driver attached)
pci0: <serial bus, USB> at device 29.3 (no driver attached)
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib2
rl0: <RealTek 8139 10/100BaseTX> port 0xd800-0xd8ff mem
0xdffffc00-0xdffffcff irq 17 at device 2.0 on pci1
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:13:d4:b1:ef:ce
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <Intel ICH6 SATA150 controller> port
0xcc00-0xcc07,0xc880-0xc883,0xc800-0xc807,0xc480-0xc483,0xc400-0xc40f
irq 19 at device 31.2 on pci0
atapci1: failed to enable memory mapping!
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
Timecounter "TSC" frequency 2676153040 Hz quality 800
Timecounters tick every 1.000 msec
IP Filter: v4.1.8 initialized. Default = pass all, Logging = enabled
ad0: 76319MB <WDC WD800BB-00JHC0 05.01C05> at ata0-master UDMA100
Trying to mount root from ufs:/dev/ad0s1a
rl0: link state changed to UP
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
