Hi there,
I've built 6.0-STABLE as of today after a fresh 6.0 install on a
Supermicro motherboard with a 3Ware 9000S-12 , and TWA_FLASH_FIRMWARE
compiled in.
The driver went from 3.60.00.017 to 3.60.02.012 , but the firmware
could not be written.
Here's the dmesg:
twa0: [FAST]
twa0: INFO: (0x15: 0x100c): Flashing bundled firmware...:
twa0: ERROR: (0x03: 0x0232): Binary image architecture incompatible:
opcode=0x56
twa0: ERROR: (0x15: 0x1006): Firmware flash failed: cmd = 0x16, chunk #
0, cmd status = 2
twa0: INFO: (0x15: 0x1017): Issuing hard (commanded) reset to the
controller...:
twa0: WARNING: (0x15: 0x100d): Unable to flash bundled firmware.
Attempting to work with fw on ctlr...:
twa0: INFO: (0x15: 0x1300): Controller details:: Model 9500S-12, 12
ports, Firmware FE9X 2.04.00.005, BIOS BE9X 2.03.01.047
3ware device driver for 9000 series storage controllers, version:
3.60.02.012
twa0: <3ware 9000 series Storage Controller> port 0x2000-0x20ff mem
0xdd200000-0xdd2000ff,0xdf800000-0xdfffffff irq 72 at device 2.0 on pci3
da0: <3ware Logical Disk 00 1.00> Fixed Direct Access SCSI-0 device
Any ideas ?
Thanks in advance!
-Carlos
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
