On Friday 06 January 2006 17:51, Gleb Kozyrev wrote:
> man uvisor
Great! Thank you. That's what I needed! -- uvisor.ko apparently uses ucom.ko
and the ucom0 device I looked for is (temporarily) created. However, after
pressing the sync button the pilot can then be accessed through
the /dev/ttyU0 device.
Since I didn't find this information at kpilot.org or pilot-link.org or
whatsoever (although they oftern refer to FreeBSD) and somebody else might
have the same problem ... here is what I did:
1. Load the proper kernel modules. Among others this is uvisor.ko.
$ kldload /boot/kernel/uvisor.ko
(In addition, I configured this in /boot/loader.conf)
2. Configure /etc/usbd.conf in such a way, that the permissions of the proper
device will be set when it appears after pressing the HotSync button. This
is /dev/ttyU0 in my case.
I just synced as a normal user and it works.
--
bye
Carsten
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
