On Saturday 03 December 2005 22:14, Garrett Wollman wrote: > went with the Acer Aspire 5002LMi. ... > been able to examine came with Atheros wireless, but this one is > Broadcom. I haven't tried Project Evil yet; since I had a Cardbus
I am with releng_6 broadcom WL works fine in 11b+g with ndis but since 6.0RC1 the button do not light anymore (on B5 the light was still on when connected) strange when i put a wi card into the pcmcia slot the wlan button light goes on > after me, "C: is for Crap and D: is for Data"). This machine required you can shrink c:/ easily without loosing the windows installation parted is on the knoppix live cd > This card has an SiS 7012, which attaches to the snd_ich driver. On > attach it reports "Unknown AC97 Codec (id = 0x414c4770)" but this does > not seem to cause a failure. From my research this seems to be an > Avance Logic ALC203; I just addded it to ac97.c but haven't had a > chance to test it yet. > if you get this work can you post it again? I did it and the AC97 is found as pcm0: <Avance Logic ALC203 AC97 Codec> but the vol+/- does still not work, only pcm volume > > - Suspend/resume was pretty sad, I don't advise trying it. I may get a sleep yes, no way to wake up :S >ACPI seems to be somewhat broken on this machine, even after updating >to the latest BIOS. The CPU-state information looks bogus (and >telling the kernel to use C3 is asking for trouble). Suspend doesn't. >There's an error in the \\_SB_.BAT1._BST method so it can't get the >battery status. Dump available on request. Bruno Ducrot made a patch for me which is working perfect and using powerd I get 70 min of batt life it found powernow0: <PowerNow! K8> on cpu0 but I needed to compile kernel with CPUTYPE=k8 João A mensagem foi scaneada pelo sistema de e-mail e pode ser considerada segura. Service fornecido pelo Datacenter Matik https://datacenter.matik.com.br _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
