Jack Vogel wrote:
On 11/29/05, *Mike Tancsa* <[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>> wrote:

    At 09:29 AM 29/11/2005, Lowell Gilbert wrote:
    >Forrest Aldrich <[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>>
    writes:
    >
    > > I have an older PC (Compaq AP200) that I'm running FreeBSD-6.0 on.
    > >
    > > I have an Intel Gigabit interface installed in one of the PCI
    slots,
    > > along with another dual 10/100 Intel in another.
    > >
    > > The "em0" device does not show up at boot time, and therefore the
    > > firewall rules fail.
    >
    >It's not detected in the boot messages at all?

    What does
    pciconf -lv show ?

             ---Mike


There are some adapters that are not in the driver. I am the person within
Intel LAD responsible for FreeBSD, we are going to try and update PCI IDs
for new devices shortly. If you can report what Mike asked we can see what
the device is and I might have a patch I can put together.

Cheers,

Jack

Hi Jack, Mike,

Thank you for your responses.  Sorry it took me a day to get to this.

Here is the output per the above command.

Thanks again,
Forrest


[EMAIL PROTECTED]:0:0: class=0x060000 card=0x00000000 chip=0x71908086 rev=0x03 hdr=0x00
   vendor   = 'Intel Corporation'
   device   = '82443BX/ZX 440BX/ZX CPU to PCI Bridge (AGP Implemented)'
   class    = bridge
   subclass = HOST-PCI
[EMAIL PROTECTED]:1:0: class=0x060400 card=0x00000000 chip=0x71918086 rev=0x03 hdr=0x01
   vendor   = 'Intel Corporation'
   device   = '82443BX/ZX 440BX/ZX AGPset PCI-to-PCI bridge'
   class    = bridge
   subclass = PCI-PCI
[EMAIL PROTECTED]:13:0: class=0x020000 card=0x11768086 chip=0x10768086 rev=0x00 hdr=0x00
   vendor   = 'Intel Corporation'
   device   = '82547EI Gigabit Ethernet Controller'
   class    = network
   subclass = ethernet
[EMAIL PROTECTED]:14:0: class=0x060400 card=0x000000dc chip=0x00241011 rev=0x03 hdr=0x01
   vendor   = 'Digital Equipment Corporation'
   device   = '21151/2 PCI to PCI Bridge'
   class    = bridge
   subclass = PCI-PCI
[EMAIL PROTECTED]:16:0: class=0x030000 card=0x08003d3d chip=0x000a3d3d rev=0x01 hdr=0x00
   vendor   = '3Dlabs, Inc. Ltd'
   device   = 'Permedia 3'
   class    = display
   subclass = VGA
[EMAIL PROTECTED]:20:0: class=0x060100 card=0x00000000 chip=0x71108086 rev=0x02 hdr=0x00
   vendor   = 'Intel Corporation'
   device   = '82371AB/EB/MB PIIX4/4E/4M ISA Bridge'
   class    = bridge
   subclass = PCI-ISA
[EMAIL PROTECTED]:20:1: class=0x010180 card=0x00000000 chip=0x71118086 rev=0x01 hdr=0x00
   vendor   = 'Intel Corporation'
   device   = '82371AB/EB/MB PIIX4/4E/4M IDE Controller'
   class    = mass storage
   subclass = ATA
[EMAIL PROTECTED]:20:2: class=0x0c0300 card=0x00000000 chip=0x71128086 rev=0x01 hdr=0x00
   vendor   = 'Intel Corporation'
   device   = '82371AB/EB/MB PIIX4/4E/4M USB Interface'
   class    = serial bus
   subclass = USB
[EMAIL PROTECTED]:20:3: class=0x068000 card=0x00000000 chip=0x71138086 rev=0x02 hdr=0x00
   vendor   = 'Intel Corporation'
   device   = '82371AB/EB/MB PIIX4/4E/4M Power Management Controller'
   class    = bridge
[EMAIL PROTECTED]:4:0: class=0x020000 card=0x10f08086 chip=0x12298086 rev=0x05 hdr=0x00
   vendor   = 'Intel Corporation'
   device   = '82550/1/7/8/9 EtherExpress PRO/100(B) Ethernet Adapter'
   class    = network
   subclass = ethernet
[EMAIL PROTECTED]:5:0: class=0x020000 card=0x10f08086 chip=0x12298086 rev=0x05 hdr=0x00
   vendor   = 'Intel Corporation'
   device   = '82550/1/7/8/9 EtherExpress PRO/100(B) Ethernet Adapter'
   class    = network
   subclass = ethernet


_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to