Max obvious didn't have time to answer...
Any ideas ?
Tnx, Marko Cuk
--
NetInet d.o.o. http://www.NetInet.si
Private: http://cuk.nu
MountainBikeSlovenia team: http://mtb.si
Slovenian FreeBSD mirror admin http://www2.si.freebsd.org
--- Begin Message ---
Hello Max !
Please, do you have any ideas...
What is the status of the tun0 driver and ALTQ ?
I have FreeBSD 6.0-RELEASE and have tried it without success. Why 6.0 ?
Don't know... curious maybe... if you think, that 5.4 will work better,
I'll reinstall it.
The tun0 is because od xDSL ( PPPoE )
It seems like packets won't match queue. Look at the pfctl output ( look
at the "bucy" rules -- he is a huge consumer and the primary uplink is
out for a week, xDSL is only backup and he consumes all the avail
bandwidth )
THIS IFACE IS TUN0 ( pppoe )
queue root_em0 bandwidth 1Gb priority 0 cbq( wrr root ) {std_ext, bucy_out}
[ pkts: 76053 bytes: 7390221 dropped pkts: 0
bytes: 0 ]
[ qlength: 0/ 50 borrows: 0 suspends: 0 ]
[ measured: 199.0 packets/s, 146.71Kb/s ]
queue std_ext bandwidth 384Kb cbq( default )
[ pkts: 76053 bytes: 7390221 dropped pkts: 0
bytes: 0 ]
[ qlength: 0/ 50 borrows: 0 suspends: 59 ]
[ measured: 199.0 packets/s, 146.71Kb/s ]
THIS ONE IS PROBLEMATIC - Won't match
queue bucy_out bandwidth 128Kb
[ pkts: 0 bytes: 0 dropped pkts: 0
bytes: 0 ]
[ qlength: 0/ 50 borrows: 0 suspends: 0 ]
[ measured: 0.0 packets/s, 0 b/s ]
queue root_em1 bandwidth 1Gb priority 0 cbq( wrr root ) {std_int, bucy_in}
[ pkts: 91920 bytes: 100394990 dropped pkts: 0
bytes: 0 ]
[ qlength: 0/ 50 borrows: 0 suspends: 0 ]
[ measured: 260.4 packets/s, 2.37Mb/s ]
queue std_int bandwidth 2Mb cbq( default )
[ pkts: 50302 bytes: 58076735 dropped pkts: 0
bytes: 0 ]
[ qlength: 0/ 50 borrows: 0 suspends: 2359 ]
[ measured: 194.6 packets/s, 1.89Mb/s ]
queue bucy_in bandwidth 900Kb
[ pkts: 41618 bytes: 42318255 dropped pkts: 446 bytes:
433317 ]
[ qlength: 0/ 50 borrows: 0 suspends: 7440 ]
[ measured: 65.8 packets/s, 475.89Kb/s ]
queue root_dc0 bandwidth 10Mb priority 0 cbq( wrr root ) {std_int_wifi_in}
[ pkts: 3967 bytes: 1730908 dropped pkts: 0
bytes: 0 ]
[ qlength: 0/ 50 borrows: 0 suspends: 0 ]
[ measured: 2.6 packets/s, 4.17Kb/s ]
queue std_int_wifi_in bandwidth 5Mb cbq( default )
[ pkts: 3967 bytes: 1730908 dropped pkts: 0
bytes: 0 ]
[ qlength: 0/ 50 borrows: 0 suspends: 0 ]
[ measured: 2.6 packets/s, 4.17Kb/s ]
This are the rules:
##########################################################################################
# QUEUEING: rule-based bandwidth control.
###########################################################################################
# TOLE JE NAS ODHODNI PROMET VEN - UPLOAD
altq on em0 cbq bandwidth 100% queue { std_ext,bucy_out }
queue std_ext bandwidth 384Kb cbq(default)
queue bucy_out bandwidth 128Kb
#########################################################################################
# TOLE JE NAS DOHODNI PROMER NOTRI - DOWNLOAD
altq on em1 cbq bandwidth 100% queue { std_int,bucy_in }
queue std_int bandwidth 2Mb cbq(default)
queue bucy_in bandwidth 900Kb
# QUEUE rule
pass in log on em1 from 10.0.100.0/24 to any queue bucy_out
pass out log on em1 from any to 10.0.100.0/24 queue bucy_in
Many thanks for any informations. I have changed the various eth cards,
from dc cards to em gigabit cards, etc, etc. Without success. I know,
that there has been some issues with tun0 on OpenBSD, but that was a
little time ago.
Bye, Marko
p.s. I have a very huge sistem, dualhomed , all based on pf and there is
one issue too, but we'll discuss it later. I have managed it with ipf (
only that source routing issue ).
Anyway, your work is very good and thanks for porting pf to FreeBSD.
--
NetInet d.o.o. http://www.NetInet.si
Private: http://cuk.nu
MountainBikeSlovenia team: http://mtb.si
Slovenian FreeBSD mirror admin http://www2.si.freebsd.org
--- End Message ---
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
