On Thu, Aug 11, 2005 at 03:44:52PM -0700, Vinod Kashyap wrote: > > I have two controllers here that are from different > > manufacturers and both exhibit the same problem. The SAME > > disks (two different manufacturers - hitachi and maxtor) on a > > motherboard ICH5 adapter work perfectly, smartmontools says > > all 4 (I have two examples of each) are healthy, and both > > ALSO work perfectly on and are declared healthy by a 3ware > > 8502's internal diags and operating kernel (smartmontools > > won't talk to them on the 8502.) > > > > smartmontools should support 3ware 7xxx & 8xxx controllers, although > not 9xxx controllers. See the answer to the question 'Can I monitor > ATA disks behind SCSI RAID controllers?' at > http://smartmontools.sourceforge.net/#FAQ. Although the answer is > for Linux, it applies to FreeBSD as well. You have to use '-d 3ware,N' > with every command, where N is the unit #. > Ex: smartctl -H -A -d 3ware,1 /dev/twed
Fs:/disk/karl> smartctl -d 3ware,1 /dev/twed0 smartctl version 5.32 Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ Smartctl open device: /dev/twed0 failed: Inappropriate ioctl for device Nope...apparently not supported on FreeBSD. -- -- Karl Denninger ([EMAIL PROTECTED]) Internet Consultant & Kids Rights Activist http://www.denninger.net My home on the net - links to everything I do! http://scubaforum.org Your UNCENSORED place to talk about DIVING! http://genesis3.blogspot.com Musings Of A Sentient Mind _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
