Hello, I try to start vmware from an user Account, new Version is compiled and i followed the Instructions in pkg-message.
ACPI is disabled.
When i run vmware i see the following via
serial Line:
linux(1677): sendsig(0x8083bdc, 11, 0xc1f63834, 30)
linux(1676): real select returns 0
linux(1676): outgoing timeout (0/0)
linux(1676): select_out -> 0
linux(1676): select(8, 0xbfbfe928, 0xbfbfe8a8, 0, 0xbfbfe89c)
linux(1676): incoming timeout (1/0)
linux(1678): stat64(/tmp/.vmware/user/1676, *)
linux(1677): rt_sigprocmask(2, 0x81ed1ec, 0, 8)
linux(1678): open(/dev/null, 0x10800, 0xbfbfaab4)
linux(1678): open returns error 0
linux(1677): open(/dev/vmmon, 0x2, 0x0)
kernel trap 12 with interrupts disabled
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x6c
fault code = supervisor read, page not present
instruction pointer = 0x8:0xc0651ab5
stack pointer = 0x10:0xd895e934
frame pointer = 0x10:0xd895e938
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = resume, IOPL = 3
current process = 1677 (vmware-ui)
[thread pid 1677 tid 100135 ]
Stopped at turnstile_setowner+0xd: movl 0x6c(%ecx),%eax
db>
db> tr
Tracing pid 1677 tid 100135 td 0xc1f63780
turnstile_setowner(c1f60800,0) at turnstile_setowner+0xd
turnstile_wait(c1f60800,c1fea128,0) at turnstile_wait+0xb7
_mtx_lock_sleep(c1fea128,c1f63780,0,c203a603,18f) at _mtx_lock_sleep+0xad
_mtx_lock_flags(c1fea128,0,c203a603,18f,c1ef9c7c) at _mtx_lock_flags+0x30
vmmon_clone(c1fcd100,3,c2169900,c1f63780,c2169944) at vmmon_clone+0x90
FreeBSD_Driver_Open(c1fcd100,3,2000,c1f63780,c203b020) at
FreeBSD_Driver_Open+0x79
spec_open(d895ea58,d895eb14,c0694fd9,d895ea58,180) at spec_open+0x226
spec_vnoperate(d895ea58) at spec_vnoperate+0x13
vn_open_cred(d895ebbc,d895ecbc,0,c2203a80,8) at vn_open_cred+0x419
vn_open(d895ebbc,d895ecbc,0,8,0) at vn_open+0x1e
kern_open(c1f63780,c1a6d400,1,3,0) at kern_open+0xe7
linux_open(c1f63780,d895ed04,3,12cf,3246) at linux_open+0x10d
syscall(2f,2f,2f,81a7648,8199688) at syscall+0x2ab
Xint0x80_syscall() at Xint0x80_syscall+0x1f
--- syscall (5, Linux ELF, linux_open), eip = 0x284865a8, esp = 0xbfbfeb90, ebp
= 0xbfbfebac ---
db>
Changes from the GENERIC KERNCONF are:
options IPFIREWALL
options IPFIREWALL_DEFAULT_TO_ACCEPT
options IPDIVERT
options DUMMYNET
options IPFILTER
options IPFILTER_LOG
options IPSTEALTH
options PERFMON
options NETGRAPH
options NETGRAPH_ETHER
options NETGRAPH_SOCKET
options NETGRAPH_PPPOE
options VFS_AIO
options HZ=1000
options NET_WITH_GIANT
dmesg:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-STABLE #0: Thu May 12 19:43:50 CEST 2005
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC
MPTable: <SiS 746 >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) XP 2600+ (1920.44-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x6a0 Stepping = 0
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,
MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory = 536805376 (511 MB)
avail memory = 515743744 (491 MB)
ioapic0: Assuming intbase of 0
ioapic0 <Version 1.1> irqs 0-23 on motherboard
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <SiS 746 host to AGP bridge> mem 0xd0000000-0xd3ffffff at device 0.0
on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <SiS 962/963 UDMA133 controller> port 0xff00-0xff0f,0x376,0x170-0x177,
0x3f6,0x1f0-0x1f7 at device 2.5 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
ohci0: <SiS 5571 USB controller> mem 0xcefed000-0xcefedfff irq 20 at device
3.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xcefee000-0xcefeefff irq 21 at device 3.1
on pci0
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
pci0: <serial bus, USB> at device 3.2 (no driver attached)
sis0: <SiS 900 10/100BaseTX> port 0xc800-0xc8ff mem 0xcefec000-0xcefecfff irq
19 at device 4.0 on pci0
miibus0: <MII bus> on sis0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: Ethernet address: 00:0b:6a:4c:f5:71
pci0: <display, VGA> at device 9.0 (no driver attached)
pci0: <simple comms, UART> at device 10.0 (no driver attached)
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xc000-0xc03f mem 0xcee00000-
0xceefffff,0xcefeb000-0xcefebfff irq 19 at device 11.0 on pci0
miibus1: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus1
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:90:27:75:68:0b
atapci1: <HighPoint HPT374 (channel 0+1) UDMA133 controller> port 0xac00-
0xacff,0xb000-0xb003,0xb400-0xb407,0xb800-0xb803,0xbc00-0xbc07 irq 16
at device 12.0 on pci0
ata2: channel #0 on atapci1
ata3: channel #1 on atapci1
atapci2: <HighPoint HPT374 (channel 2+3) UDMA133 controller> port 0xcc00-
0xccff,0xd000-0xd003,0xd400-0xd407,0xd800-0xd803,0xdc00-0xdc07 irq 16
at device 12.1 on pci0
ata4: channel #0 on atapci2
ata5: channel #1 on atapci2
pcib2: <MPTable PCI-PCI bridge> at device 13.0 on pci0
pci3: <PCI bus> on pcib2
de0: <Digital 21140A Fast Ethernet> port 0x6c00-0x6c7f mem 0xcdafff80-
0xcdafffff irq 17 at device 4.0 on pci3
de0: Cogent EM440TX 21140A [10-100Mb/s] pass 2.2
de0: Ethernet address: 00:00:d1:1d:d4:b8
de0: if_start running deferred for Giant
de1: <Digital 21140A Fast Ethernet> port 0x6800-0x687f mem 0xcdafff00-
0xcdafff7f irq 18 at device 5.0 on pci3
de1: Cogent EM440TX 21140A [10-100Mb/s] pass 2.2
de1: Ethernet address: 00:00:d1:1d:d4:b9
de1: if_start running deferred for Giant
de2: <Digital 21140A Fast Ethernet> port 0x6400-0x647f mem 0xcdaffe80-
0xcdaffeff irq 19 at device 6.0 on pci3
de2: Cogent EM440TX 21140A [10-100Mb/s] pass 2.2
de2: Ethernet address: 00:00:d1:1d:d4:ba
de2: if_start running deferred for Giant
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0401> can't assign resources (port)
ulpt0: Hewlett-Packard hp LaserJet 1010, rev 1.10/1.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode
Timecounter "TSC" frequency 1920442354 Hz quality 800
Timecounters tick every 10.000 msec
ad0: 114498MB <SAMSUNG SP1213N/TL100-24> [232632/16/63] at ata0-master UDMA100
ad1: 8809MB <QUANTUM FIREBALLP KA9.1/A42.0400> [17898/16/63] at ata0-slave
UDMA66
ad4: 114473MB <ST3120026AS/3.05> [232581/16/63] at ata2-master UDMA133
ad6: 114473MB <ST3120026AS/3.18> [232581/16/63] at ata3-master UDMA133
ar0: 114473MB <ATA RAID1 array> [14593/255/63] status: READY subdisks:
disk0 READY on ad6 at ata3-master
disk1 READY on ad4 at ata2-master
with best regards,
Wilhelm Greiner
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
