It's not related to more-than-full fs: it occured one more time without it :(
Do someone have an idea ? Geoffroy Desvernay a écrit : > This server (FreeBSD 5.4 RELENG) is crashing once a week or more since > 5.4 (maybe before). > > It may be related with a full filesystem: > I'm using snapshots on this server (using > http://people.freebsd.org/~rse/snapshot/), and crash has occured after > (~30mins) a snapshot that fills up to 100% the filesystem. > > Attached the dmesg and kgdb logs. > > I'm not so hacker, but hope that it can help to resolve this bug. > > > > > ------------------------------------------------------------------------ > > [GDB will not be able to debug user-mode threads: /usr/lib/libthread_db.so: > Undefined symbol "ps_pglobal_lookup"] > GNU gdb 6.1.1 [FreeBSD] > Copyright 2004 Free Software Foundation, Inc. > GDB is free software, covered by the GNU General Public License, and you are > welcome to change it and/or distribute copies of it under certain conditions. > Type "show copying" to see the conditions. > There is absolutely no warranty for GDB. Type "show warranty" for details. > This GDB was configured as "i386-marcel-freebsd". > #0 doadump () at pcpu.h:160 > 160 __asm __volatile("movl %%fs:0,%0" : "=r" (td)); > (kgdb) bt full > #0 doadump () at pcpu.h:160 > No locals. > #1 0xc06878d6 in boot (howto=260) at /usr/src/sys/kern/kern_shutdown.c:410 > first_buf_printf = 1 > #2 0xc0687cc4 in panic (fmt=0xc091a1ae "initiate_write_inodeblock_ufs2: > already started") > at /usr/src/sys/kern/kern_shutdown.c:566 > td = (struct thread *) 0xc3641c00 > bootopt = 260 > newpanic = 0 > ap = 0xc3641c00 "\\\214\220Ã -XÃ" > buf = "initiate_write_inodeblock_ufs2: already started", '\0' <repeats > 208 times> > #3 0xc080ef5f in initiate_write_inodeblock_ufs2 (inodedep=0xc5be0280, bp=0x0) > at /usr/src/sys/ufs/ffs/ffs_softdep.c:3781 > adp = (struct allocdirect *) 0xd75bd13c > lastadp = (struct allocdirect *) 0x1000 > dp = (struct ufs2_dinode *) 0x0 > fs = (struct fs *) 0xc21f6730 > i = Unhandled dwarf expression opcode 0x93 > (kgdb) quit > > > ------------------------------------------------------------------------ > > Copyright (c) 1992-2005 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 5.4-STABLE #0: Mon Jun 6 18:51:49 CEST 2005 > [EMAIL PROTECTED]:/usr/obj/usr/src/sys/ZLIP > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2392.29-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Hyperthreading: 2 logical CPUs > real memory = 2147287040 (2047 MB) > avail memory = 2095828992 (1998 MB) > ACPI APIC Table: <DELL PE2600 > > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > cpu2 (AP): APIC ID: 6 > cpu3 (AP): APIC ID: 7 > ioapic0: Changing APIC ID to 8 > ioapic1: Changing APIC ID to 9 > ioapic2: Changing APIC ID to 10 > ioapic2: WARNING: intbase 72 != expected base 48 > ioapic3: Changing APIC ID to 11 > ioapic3: WARNING: intbase 120 != expected base 96 > ioapic4: Changing APIC ID to 12 > ioapic0 <Version 2.0> irqs 0-23 on motherboard > ioapic1 <Version 2.0> irqs 24-47 on motherboard > ioapic2 <Version 2.0> irqs 72-95 on motherboard > ioapic3 <Version 2.0> irqs 120-143 on motherboard > ioapic4 <Version 2.0> irqs 144-167 on motherboard > npx0: <math processor> on motherboard > npx0: INT 16 interface > acpi0: <DELL PE2600> on motherboard > acpi0: Power Button (fixed) > Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > cpu0: <ACPI CPU> on acpi0 > cpu1: <ACPI CPU> on acpi0 > cpu2: <ACPI CPU> on acpi0 > cpu3: <ACPI CPU> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > pci1: <base peripheral, interrupt controller> at device 28.0 (no driver > attached) > pcib2: <ACPI PCI-PCI bridge> at device 29.0 on pci1 > pci2: <ACPI PCI bus> on pcib2 > em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port > 0xece0-0xecff mem 0xfdec0000-0xfdedffff,0xfdee0000-0xfdefffff irq 24 at > device 2.0 on pci2 > em0: Ethernet address: 00:02:b3:d4:d3:a2 > em0: Speed:N/A Duplex:N/A > pci1: <base peripheral, interrupt controller> at device 30.0 (no driver > attached) > pcib3: <ACPI PCI-PCI bridge> at device 31.0 on pci1 > pci3: <ACPI PCI bus> on pcib3 > em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port > 0xdce0-0xdcff mem 0xfdcc0000-0xfdcdffff,0xfdce0000-0xfdcfffff irq 28 at > device 1.0 on pci3 > em1: Ethernet address: 00:0b:db:92:0a:e4 > em1: Speed:N/A Duplex:N/A > pcib4: <ACPI PCI-PCI bridge> at device 3.0 on pci0 > pci4: <ACPI PCI bus> on pcib4 > pci4: <base peripheral, interrupt controller> at device 28.0 (no driver > attached) > pcib5: <ACPI PCI-PCI bridge> at device 29.0 on pci4 > pci5: <ACPI PCI bus> on pcib5 > pci4: <base peripheral, interrupt controller> at device 30.0 (no driver > attached) > pcib6: <ACPI PCI-PCI bridge> at device 31.0 on pci4 > pci6: <ACPI PCI bus> on pcib6 > bge0: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem > 0xfd8f0000-0xfd8fffff irq 80 at device 3.0 on pci6 > miibus0: <MII bus> on bge0 > brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0 > brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, > 1000baseTX-FDX, auto > bge0: Ethernet address: 00:10:18:06:39:68 > pcib7: <ACPI PCI-PCI bridge> at device 4.0 on pci0 > pci7: <ACPI PCI bus> on pcib7 > pci7: <base peripheral, interrupt controller> at device 28.0 (no driver > attached) > pcib8: <ACPI PCI-PCI bridge> at device 29.0 on pci7 > pci8: <ACPI PCI bus> on pcib8 > amr0: <LSILogic MegaRAID 1.51> mem 0xfebf0000-0xfebfffff irq 120 at device > 8.0 on pci8 > amr0: <LSILogic PERC 4/Di> Firmware 250O, BIOS 1.06, 128MB RAM > pci7: <base peripheral, interrupt controller> at device 30.0 (no driver > attached) > pcib9: <ACPI PCI-PCI bridge> at device 31.0 on pci7 > pci10: <ACPI PCI bus> on pcib9 > ahc0: <Adaptec 3960D Ultra160 SCSI adapter> port 0xbc00-0xbcff mem > 0xfd3ff000-0xfd3fffff irq 148 at device 7.0 on pci10 > aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs > ahc1: <Adaptec 3960D Ultra160 SCSI adapter> port 0xb800-0xb8ff mem > 0xfd3fe000-0xfd3fefff irq 149 at device 7.1 on pci10 > aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs > uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x9ce0-0x9cff irq > 16 at device 29.0 on pci0 > usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > pcib10: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci11: <ACPI PCI bus> on pcib10 > pci11: <display, VGA> at device 4.0 (no driver attached) > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel ICH3 UDMA100 controller> port > 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 > ata0: channel #0 on atapci0 > ata1: channel #1 on atapci0 > fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: model IntelliMouse Explorer, device ID 4 > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 > sio0: type 16550A > sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 > sio1: type 16550A > ppc0: <ECP parallel printer port> port 0x778-0x77f,0x378-0x37f irq 7 drq 1 on > acpi0 > ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode > ppc0: FIFO with 16/16/8 bytes threshold > ppbus0: <Parallel port bus> on ppc0 > plip0: <PLIP network interface> on ppbus0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > orm0: <ISA Option ROMs> at iomem 0xec000-0xeffff,0xc0000-0xc7fff on isa0 > pmtimer0 on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > Timecounters tick every 10.000 msec > acd0: CDROM <SAMSUNG CD-ROM SN-124/N103> at ata0-master PIO4 > Waiting 15 seconds for SCSI devices to settle > amrd0: <LSILogic MegaRAID logical drive> on amr0 > amrd0: 69758MB (142864384 sectors) RAID 1 (optimal) > ses0 at amr0 bus 0 target 6 lun 0 > ses0: <PE/PV 1x6 SCSI BP 1.1> Fixed Processor SCSI-2 device > ses0: SAF-TE Compliant Device > da0 at ahc0 bus 0 target 0 lun 0 > da0: <transtec 0001> Fixed Direct Access SCSI-3 device > da0: 160.000MB/s transfers (80.000MHz, offset 31, 16bit), Tagged Queueing > Enabled > da0: 200000MB (409600000 512 byte sectors: 255H 63S/T 25496C) > da1 at ahc0 bus 0 target 1 lun 0 > da1: <transtec 0001> Fixed Direct Access SCSI-3 device > da1: 160.000MB/s transfers (80.000MHz, offset 31, 16bit), Tagged Queueing > Enabled > da1: 200000MB (409600000 512 byte sectors: 255H 63S/T 25496C) > da2 at ahc0 bus 0 target 2 lun 0 > da2: <transtec 0001> Fixed Direct Access SCSI-3 device > da2: 160.000MB/s transfers (80.000MHz, offset 31, 16bit), Tagged Queueing > Enabled > da2: 200000MB (409600000 512 byte sectors: 255H 63S/T 25496C) > da3 at ahc0 bus 0 target 3 lun 0 > da3: <transtec 0001> Fixed Direct Access SCSI-3 device > da3: 160.000MB/s transfers (80.000MHz, offset 31, 16bit), Tagged Queueing > Enabled > da3: 300000MB (614400000 512 byte sectors: 255H 63S/T 38244C) > da4 at ahc0 bus 0 target 4 lun 0 > da4: <transtec 0001> Fixed Direct Access SCSI-3 device > da4: 160.000MB/s transfers (80.000MHz, offset 31, 16bit), Tagged Queueing > Enabled > da4: 266856MB (546521088 512 byte sectors: 255H 63S/T 34019C) > SMP: AP CPU #1 Launched! > SMP: AP CPU #2 Launched! > SMP: AP CPU #3 Launched! > Mounting root from ufs:/dev/amrd0s1a > WARNING: / was not properly dismounted > WARNING: /tmp was not properly dismounted > WARNING: /usr was not properly dismounted > WARNING: /var was not properly dismounted > /var: mount pending error: blocks 156 files 1 > WARNING: /var/crash was not properly dismounted > WARNING: /anonftp was not properly dismounted > WARNING: /jukebox was not properly dismounted > WARNING: /anonftp/pub2 was not properly dismounted > WARNING: /savesm2 was not properly dismounted > /savesm2: mount pending error: blocks 3230304 files 1 > WARNING: /sav was not properly dismounted > em1: Link is up 1000 Mbps Full Duplex
smime.p7s
Description: S/MIME Cryptographic Signature
