> I have installed FreeBSD 5.4 RELEASE and upgraded to -STABLE on a DELL > PE2850. > > FreeBSD 5.4-STABLE #1: Wed May 25 23:43:12 BST 2005 > CPU: Intel(R) Xeon(TM) CPU 3.20GHz (3192.22-MHz 686-class CPU) > real memory = 5100273664 (4864 MB) > avail memory = 4189892608 (3995 MB) > MPTable: <DELL PE 016D > > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 6 > amr0: <LSILogic PERC 4e/Di> Firmware 516A, BIOS H418, 256MB RAM > > I have disabled ACPI HTT and enabled PAE to make the whole system memory > available. > > However the problem I have is the system can crash at any moment, and is not > load related. As the crash info below is when the machine was in an 100% > idle state.
I have the same hardware as well, running on the i386-port. I have disabled usb with usbd_enable="NO" in /etc/rc.conf. I have no idea whether this helps but havent't had an issue with the 2850. Except with a qlogic-hba and the isp-driver (I suspect) *on* amd64, but *not* on i386. Claus _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
