--- Søren Schmidt <[EMAIL PROTECTED]> wrote:
> > Is there anything in -CURRENT that would help this
> to
> > work better than 5-STABLE plus the ATA mkIII "n"
> > patches?
>
> Yes, I've done quite a bit of changes that affects
> this on -current.
> However its done blindfolded since I dont have a
> nForce4 based system
> here yet (but should soon).
>
> - Søren
How soon is "soon"? I may be able to send you some
hardware too if that would be helpful.
I tried a -CURRENT kernel today but didn't
build/install world or anything else as I don't want
to mess up this machines 5.4 installation. The result
was that it now seems to identify all the atapici0 -
atapici3 controllers and doesn't do the repeated
DISCONNECTED/CONNECTED messages but it still panicked
near the end of the bootup process, around the USB
area.
I called a friend today who has a spare SATA drive I
can borrow so I'll be picking that up tomorrow and
I'll swap out drives and do a fresh -CURRENT install
tomorrow on that new drive to see if I can get it any
further along towards a successful boot. I'll report
back with my findings.
Thanks for the help!
--Alan Bryan
__________________________________
Do you Yahoo!?
Yahoo! Small Business - Try our new Resources site
http://smallbusiness.yahoo.com/resources/
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
