Hi, usually I hate replying to myself, but this time it seems to be good news :-)
The describe behaviour (see below) is no longer reproducable with the latest 5.4-STABLE as of today (8.5.2005, around 18:00 CEST). So thanx to whoever fixed this ;-) Regards, Holger On Sun, May 08, 2005 at 02:38:58PM +0200, Holger Kipp wrote: > I have a very interesting behaviour here. During boot, I can use > the keyboard (eg on the initial boot menu), but if I press a key > after the message > > "Starting sshd" > > was printed (and before the login prompt), I get > > ----------------------- > Fatal trap 12: page fault while in kernel mode > fault virtual address = 0xae > fault code = supervisor read, page not present > instruction pointer = 0x8:0xae > stack pointer = 0x10:0xd41bdc94 > frame pointer = 0x10:0xd41bdcb0 > code segment = base 0x0, limit 0xfffff, type 0x1b > = DPL 0, pres 1, def32 1, gran 1 > processor eflags = interrupt enabled, resume, IOPL = 0 > current process = 12 (irq1: atkbd0) > trap number = 12 > panic: page fault > Uptime: 21s > Cannot dump. No dump device defined. > Automatic reboot in 15 seconds - press a key on the console to abort > --> Press a key on the console to reboot, > --> or switch off the system now. > ----------------------- > > Anything stupid I have missed? > Regards, > Holger Kipp > > - - - - - - - - - - - - - - - - - - - - - > > dmesg is: > > Copyright (c) 1992-2005 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 5.4-STABLE #5: Thu May 5 21:18:07 CEST 2005 > [EMAIL PROTECTED]:/usr/obj/usr/src/sys/KATRIN > ACPI APIC Table: <A M I OEMAPIC > > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: AMD Duron(tm) (1300.06-MHz 686-class CPU) > Origin = "AuthenticAMD" Id = 0x671 Stepping = 1 > > Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> > AMD Features=0xc0400000<AMIE,DSP,3DNow!> > real memory = 536543232 (511 MB) > avail memory = 515383296 (491 MB) > ioapic0: Changing APIC ID to 1 > MADT: Forcing active-low polarity and level trigger for SCI > ioapic0 <Version 0.3> irqs 0-23 on motherboard > npx0: <math processor> on motherboard > npx0: INT 16 interface > acpi0: <A M I OEMRSDT> on motherboard > acpi0: Power Button (fixed) > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > cpu0: <ACPI CPU> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > agp0: <VIA KT880 host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 > on pci0 > pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > pci1: <display, VGA> at device 0.0 (no driver attached) > atapci0: <VIA 6420 SATA150 controller> port > 0xd800-0xd8ff,0xdc00-0xdc0f,0xe000-0xe003,0xe400-0xe407,0xe800-0xe803,0xec00-0xec07 > irq 20 at device 15.0 on pci0 > ata2: channel #0 on atapci0 > ata3: channel #1 on atapci0 > atapci1: <VIA 8237 UDMA133 controller> port > 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0 > ata0: channel #0 on atapci1 > ata1: channel #1 on atapci1 > uhci0: <VIA 83C572 USB controller> port 0xc000-0xc01f irq 21 at device 16.0 > on pci0 > usb0: <VIA 83C572 USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 21 at device 16.1 > on pci0 > usb1: <VIA 83C572 USB controller> on uhci1 > usb1: USB revision 1.0 > uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > uhci2: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 21 at device 16.2 > on pci0 > usb2: <VIA 83C572 USB controller> on uhci2 > usb2: USB revision 1.0 > uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub2: 2 ports with 2 removable, self powered > uhci3: <VIA 83C572 USB controller> port 0xcc00-0xcc1f irq 21 at device 16.3 > on pci0 > usb3: <VIA 83C572 USB controller> on uhci3 > usb3: USB revision 1.0 > uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub3: 2 ports with 2 removable, self powered > pci0: <serial bus, USB> at device 16.4 (no driver attached) > isab0: <PCI-ISA bridge> at device 17.0 on pci0 > isa0: <ISA bus> on isab0 > pci0: <multimedia, audio> at device 17.5 (no driver attached) > vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xd400-0xd4ff mem > 0xfebffc00-0xfebffcff irq 23 at device 18.0 on pci0 > miibus0: <MII bus> on vr0 > ukphy0: <Generic IEEE 802.3u media interface> on miibus0 > ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > vr0: Ethernet address: 00:0b:6a:c0:00:ce > acpi_button0: <Power Button> on acpi0 > fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on > acpi0 > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on > acpi0 > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > ppc0: FIFO with 16/16/9 bytes threshold > ppbus0: <Parallel port bus> on ppc0 > ppbus0: IEEE1284 device found /NIBBLE/ECP > Probing for PnP devices on ppbus0: > ppbus0: <HEWLETT-PACKARD DESKJET 640C> MLC,PCL,PML > plip0: <PLIP network interface> on ppbus0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 > sio0: type 16550A > pmtimer0 on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > ums0: vendor 0x1241 product 0x1122, rev 1.00/1.00, addr 2, iclass 3/1 > ums0: 5 buttons and Z dir. > uhub4: Cypress Semiconductor Slim Hub, class 9/0, rev 2.00/0.08, addr 2 > uhub4: 4 ports with 4 removable, self powered > umass0: SMSC 223 USB97C223, rev 2.00/1.95, addr 3 > uscanner0: EPSON EPSON Scanner, rev 1.10/1.00, addr 4 > Timecounter "TSC" frequency 1300055309 Hz quality 800 > Timecounters tick every 10.000 msec > ad0: 152627MB <SAMSUNG SP1614N/TM100-30> [310101/16/63] at ata0-master UDMA100 > ad1: 76351MB <SAMSUNG SP0802N/TK100-24> [155127/16/63] at ata0-slave UDMA100 > acd0: DVDR <HL-DT-ST DVDRAM GSA-4163B/A102> at ata1-master UDMA33 > acd1: CDRW <HL-DT-ST RW/DVD GCC-4120B/2.01> at ata1-slave PIO4 > cd0 at ata1 bus 0 target 0 lun 0 > cd0: <HL-DT-ST DVDRAM GSA-4163B A102> Removable CD-ROM SCSI-0 device > cd0: 33.000MB/s transfers > cd0: Attempt to query device size failed: NOT READY, Medium not present > cd1 at ata1 bus 0 target 1 lun 0 > cd1: <HL-DT-ST RW/DVD GCC-4120B 2.01> Removable CD-ROM SCSI-0 device > cd1: 16.000MB/s transfers > cd1: Attempt to query device size failed: NOT READY, Medium not present > da0 at umass-sim0 bus 0 target 0 lun 0 > da0: <SMSC 223 U HS-CF 1.95> Removable Direct Access SCSI-0 device > da0: 1.000MB/s transfers > da0: Attempt to query device size failed: NOT READY, Medium not present > da1 at umass-sim0 bus 0 target 0 lun 1 > da1: <SMSC 223 U HS-MS 1.95> Removable Direct Access SCSI-0 device > da1: 1.000MB/s transfers > da1: Attempt to query device size failed: NOT READY, Medium not present > da2 at umass-sim0 bus 0 target 0 lun 2 > da2: <SMSC 223 U HS-SM 1.95> Removable Direct Access SCSI-0 device > da2: 1.000MB/s transfers > da2: Attempt to query device size failed: NOT READY, Medium not present > da3 at umass-sim0 bus 0 target 0 lun 3 > da3: <SMSC 223 U HS-SD/MMC 1.95> Removable Direct Access SCSI-0 device > da3: 1.000MB/s transfers > da3: Attempt to query device size failed: NOT READY, Medium not present > (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da0:umass-sim0:0:0:0): SCSI Status: Check Condition > (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 > (da0:umass-sim0:0:0:0): Medium not present > (da0:umass-sim0:0:0:0): Unretryable error > Opened disk da0 -> 6 > (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da0:umass-sim0:0:0:0): SCSI Status: Check Condition > (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 > (da0:umass-sim0:0:0:0): Medium not present > (da0:umass-sim0:0:0:0): Unretryable error > Opened disk da0 -> 6 > (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da0:umass-sim0:0:0:0): SCSI Status: Check Condition > (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 > (da0:umass-sim0:0:0:0): Medium not present > (da0:umass-sim0:0:0:0): Unretryable error > Opened disk da0 -> 6 > (da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0 > (da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error > (da1:umass-sim0:0:0:1): SCSI Status: Check Condition > (da1:umass-sim0:0:0:1): NOT READY asc:3a,0 > (da1:umass-sim0:0:0:1): Medium not present > (da1:umass-sim0:0:0:1): Unretryable error > Opened disk da1 -> 6 > (da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0 > (da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error > (da1:umass-sim0:0:0:1): SCSI Status: Check Condition > (da1:umass-sim0:0:0:1): NOT READY asc:3a,0 > (da1:umass-sim0:0:0:1): Medium not present > (da1:umass-sim0:0:0:1): Unretryable error > Opened disk da1 -> 6 > (da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0 > (da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error > (da1:umass-sim0:0:0:1): SCSI Status: Check Condition > (da1:umass-sim0:0:0:1): NOT READY asc:3a,0 > (da1:umass-sim0:0:0:1): Medium not present > (da1:umass-sim0:0:0:1): Unretryable error > Opened disk da1 -> 6 > (da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0 > (da2:umass-sim0:0:0:2): CAM Status: SCSI Status Error > (da2:umass-sim0:0:0:2): SCSI Status: Check Condition > (da2:umass-sim0:0:0:2): NOT READY asc:3a,0 > (da2:umass-sim0:0:0:2): Medium not present > (da2:umass-sim0:0:0:2): Unretryable error > Opened disk da2 -> 6 > (da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0 > (da2:umass-sim0:0:0:2): CAM Status: SCSI Status Error > (da2:umass-sim0:0:0:2): SCSI Status: Check Condition > (da2:umass-sim0:0:0:2): NOT READY asc:3a,0 > (da2:umass-sim0:0:0:2): Medium not present > (da2:umass-sim0:0:0:2): Unretryable error > Opened disk da2 -> 6 > (da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0 > (da2:umass-sim0:0:0:2): CAM Status: SCSI Status Error > (da2:umass-sim0:0:0:2): SCSI Status: Check Condition > (da2:umass-sim0:0:0:2): NOT READY asc:3a,0 > (da2:umass-sim0:0:0:2): Medium not present > (da2:umass-sim0:0:0:2): Unretryable error > Opened disk da2 -> 6 > (da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0 > (da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error > (da3:umass-sim0:0:0:3): SCSI Status: Check Condition > (da3:umass-sim0:0:0:3): NOT READY asc:3a,0 > (da3:umass-sim0:0:0:3): Medium not present > (da3:umass-sim0:0:0:3): Unretryable error > Opened disk da3 -> 6 > (da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0 > (da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error > (da3:umass-sim0:0:0:3): SCSI Status: Check Condition > (da3:umass-sim0:0:0:3): NOT READY asc:3a,0 > (da3:umass-sim0:0:0:3): Medium not present > (da3:umass-sim0:0:0:3): Unretryable error > Opened disk da3 -> 6 > (da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0 > (da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error > (da3:umass-sim0:0:0:3): SCSI Status: Check Condition > (da3:umass-sim0:0:0:3): NOT READY asc:3a,0 > (da3:umass-sim0:0:0:3): Medium not present > (da3:umass-sim0:0:0:3): Unretryable error > Opened disk da3 -> 6 > Mounting root from ufs:/dev/ad0s1a > WARNING: / was not properly dismounted > WARNING: /tmp was not properly dismounted > WARNING: /usr was not properly dismounted > WARNING: /var was not properly dismounted > WARNING: /mnt was not properly dismounted > WARNING: /mnt/var was not properly dismounted > WARNING: /mnt/tmp was not properly dismounted > WARNING: /mnt/usr was not properly dismounted > pcm0: <VIA VT8237> port 0xd000-0xd0ff irq 22 at device 17.5 on pci0 > pcm0: <Unknown AC97 Codec (id = 0x434d4983)> > > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "[EMAIL PROTECTED]" _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
