Hi Everyone,
I have installed a Netgear 802.11b (MA311) PCI card into my freebsd box
but I can't get it to transfer data faster than 180KBps in either
direction. I have tried the card in 2 freebsd boxes one running 5.1
Release and the other 5.4 Stable, no difference. I also ran trafshow on
wi0 and the traffic looks to come in bursts.
I have included my config below, can anyone see a problem?
Thank you.
-Chris
-----------------------------------------------
wi0: <Intersil Prism2.5> mem 0x40400000-0x40400fff irq 21 at device 10.0
on pci2
wi0: using RF:PRISM2.5 MAC:ISL3874A(Mini-PCI)
wi0: Intersil Firmware: Primary (1.1.0), Station (1.4.9)
wi0: Ethernet address: 00:09:5b:69:15:58
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
su-2.05b# uname -a
FreeBSD spunky2.routemaster.net 5.4-STABLE FreeBSD 5.4-STABLE #3: Thu
Apr 21 01:03:43 EST 2005
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/SPUNKY2 i386
su-2.05b# ifconfig wi0
wi0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::209:5bff:fe69:1558%wi0 prefixlen 64 scopeid 0x2
inet 10.10.11.254 netmask 0xffffff00 broadcast 10.10.11.255
ether 00:09:5b:69:15:58
media: IEEE 802.11 Wireless Ethernet DS/11Mbps <hostap>
(DS/2Mbps <hostap>)
status: associated
ssid Spunky_AP 1:Spunky_AP
stationname "FreeBSD WaveLAN/IEEE node"
channel 6 authmode OPEN powersavemode OFF powersavesleep 100
rtsthreshold 2312 protmode CTS
wepmode OFF weptxkey 1
NIC serial number: [ 99SA01000000 ]
Station name: [ FreeBSD WaveLAN/IEEE node ]
SSID for IBSS creation: [ Spunky_AP ]
Current netname (SSID): [ Spunky_AP ]
Desired netname (SSID): [ Spunky_AP ]
Current BSSID: [ 00:09:5b:69:15:58 ]
Channel list: [ 7ff ]
IBSS channel: [ 6 ]
Current channel: [ 6 ]
Comms quality/signal/noise: [ 0 81 27 ]
dBm Coms Quality: [ 0 -73 -73 ]
Promiscuous mode: [ Off ]
Process 802.11b Frame: [ Off ]
Intersil-Prism2 based card: [ 1 ]
Port type (1=BSS, 3=ad-hoc): [ 6 ]
MAC address: [ 00:09:5b:69:15:58 ]
TX rate (selection): [ 11 ]
TX rate (actual speed): [ 2 ]
RTS/CTS handshake threshold: [ 2312 ]
Create IBSS: [ Off ]
Access point density: [ 1 ]
Power Mgmt (1=on, 0=off): [ 0 ]
Max sleep time: [ 100 ]
PRI Identity: [ 21 0 1 1 ]
STA Identity: [ 31 9 1 4 ]
Card ID register: [ 8013 0 1 0 ]
Regulatory Domains: [ usa ]
Temperature Range: [ 1 ]
WEP encryption: [ Off ]
TX encryption key: [ 1 ]
Encryption keys: [ ][ ][ ][ ]
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
