Young Lee wrote:
> the system is hang and throw a fatal 12 pannic.
>
> I build mysql41-server from port without any parameters, and the
> thread lib use libpthread.so.1, use ldd to look details as below
>
> admin# ldd /usr/local/libexec/mysqld
> /usr/local/libexec/mysqld:
> libz.so.2 => /lib/libz.so.2 (0x28422000)
> libwrap.so.3 => /usr/lib/libwrap.so.3 (0x28432000)
> libcrypt.so.2 => /lib/libcrypt.so.2 (0x2843a000)
> libstdc++.so.4 => /usr/lib/libstdc++.so.4 (0x28452000)
> libm.so.3 => /lib/libm.so.3 (0x28524000)
> libpthread.so.1 => /usr/lib/libpthread.so.1 (0x2853f000)
> libc.so.5 => /lib/libc.so.5 (0x28563000)
>
i wonder why should it uses libwrap and libstdc++...
did you try compiling it optimized? or with linuxthreads?
> I use the original SMP kernel configuration file:
>
> admin# cat /usr/src/sys/i386/conf/SMP
> include GENERIC
> ident SMP-GENERIC
> options SMP
did you add "options SMP" in your kernel conf?
I can see the kernel loading 1 CPU
should look like that:
<snip>
...
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE-p5 #2: Tue Feb 22 16:47:08 UTC 2005
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC
ACPI APIC Table: <HP 00000083>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 3.20GHz (3200.13-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf34 Stepping = 4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 2147430400 (2047 MB)
avail memory = 2100178944 (2002 MB)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 6
cpu3 (AP): APIC ID: 7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
...
</snip>
>
> -------------------- dmesg with up below ---------------------
> Copyright (c) 1992-2005 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD 5.4-PRERELEASE #2: Thu Mar 24 19:16:17 CST 2005
> [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2387.28-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
>
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,
> MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> real memory = 2147352576 (2047 MB)
> avail memory = 2095882240 (1998 MB)
> ACPI APIC Table: <DELL PE2650 >
> ioapic0: Changing APIC ID to 8
> ioapic1: Changing APIC ID to 9
> ioapic2: Changing APIC ID to 10
> MADT: Forcing active-low polarity and level trigger for SCI
> ioapic0 <Version 1.1> irqs 0-15 on motherboard
> ioapic1 <Version 1.1> irqs 16-31 on motherboard
> ioapic2 <Version 1.1> irqs 32-47 on motherboard
> npx0: <math processor> on motherboardusing
> npx0: INT 16 interfaceusing
> acpi0: <DELL PE2650> on motherboard
> acpi0: Power Button (fixed)
> Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
> acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
> cpu0: <ACPI CPU> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pci0: <unknown> at device 4.0 (no driver attached)
> pci0: <unknown> at device 4.1 (no driver attached)
> pci0: <unknown> at device 4.2 (no driver attached)
> pci0: <display, VGA> at device 14.0 (no driver attached)
> atapci0: <ServerWorks CSB5 UDMA100 controller> port
> 0x8b0-0x8bf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 1
> 5.1 on pci0
> ata0: channel #0 on atapci0
> ata1: channel #1 on atapci0
> ohci0: <OHCI (generic) USB controller> mem 0xfe100000-0xfe100fff irq 5 at
> device 15.2 on pci0
> usb0: OHCI version 1.0, legacy support
> usb0: SMM does not respond, resetting
> usb0: <OHCI (generic) USB controller> on ohci0
> usb0: USB revision 1.0
> uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 4 ports with 4 removable, self powered
> isab0: <PCI-ISA bridge> at device 15.3 on pci0
> isa0: <ISA bus> on isab0
> pcib1: <ACPI Host-PCI bridge> on acpi0
> pci4: <ACPI PCI bus> on pcib1
> pcib2: <ACPI PCI-PCI bridge> at device 8.0 on pci4
> pci5: <ACPI PCI bus> on pcib2
> aac0: <Dell PERC 3/Di> mem 0xf8000000-0xfbffffff irq 30 at device 8.1 on pci4
> aac0: i960RX 100MHz, 54MB cache memory, optional battery present
> aac0: Kernel 2.8-0, Build 6082, S/N a438d3
> aac0: Supported
> Options=275c<WCACHE,DATA64,HOSTTIME,WINDOW4GB,SOFTERR,NORECOND,SGMAP64>
> pcib3: <ACPI Host-PCI bridge> on acpi0
> pci3: <ACPI PCI bus> on pcib3
> bge0: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem
> 0xfcf10000-0xfcf1ffff irq 28 at device 6.0 on p
> ci3
> miibus0: <MII bus> on bge0
> brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0
> brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
> 1000baseTX-FDX, auto
> bge0: Ethernet address: 00:0d:56:ba:1f:6b
> bge1: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem
> 0xfcf00000-0xfcf0ffff irq 29 at device 8.0 on p
> ci3
> miibus1: <MII bus> on bge1
> brgphy1: <BCM5703 10/100/1000baseTX PHY> on miibus1
> brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
> 1000baseTX-FDX, auto
> bge1: Ethernet address: 00:0d:56:ba:1f:6c
> pcib4: <ACPI Host-PCI bridge> on acpi0
> pci2: <ACPI PCI bus> on pcib4
> pcib5: <ACPI Host-PCI bridge> on acpi0
> pci1: <ACPI PCI bus> on pcib5
> fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
> sio0: type 16550A
> sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
> orm0: <ISA Option ROMs> at iomem
> 0xec000-0xeffff,0xc8000-0xcbfff,0xc0000-0xc7fff on isa0
> pmtimer0 on isa0
> ppc0: parallel port not found.
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> Timecounter "TSC" frequency 2387278408 Hz quality 800
> Timecounters tick every 10.000 msec
> acd0: CDROM <TEAC CD-ROM CD-224E/K.9A> at ata0-master UDMA33
> aacd0: <RAID 5> on aac0
> aacd0: 104137MB (213274368 sectors)
> Mounting root from ufs:/dev/aacd0s1a
> IP Filter: v3.4.35 initialized. Default = pass all, Logging = enabled
> -------------------- dmesg end -------------------------------
>
>
--
Uzi Klein
Software Development Manager
BMBY Software Systems Ltd
2 Hataasia Street, Yokneam, Israel
Email: [EMAIL PROTECTED]
Phone: +972 4 959 79 89
Mobile: +972 52 374 53 34
Fax: +972 3 617 93 36
Web: http://www.bmby.com
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
