On Thursday 24 February 2005 05:30 am, Mateusz JÄdrasik wrote: > Hi, > > I have a D925XCV Intel motherboard, with if_sk on it as a builtin > ethernet adapter. on bootup of 5.3-RELEASE i recieve some > acpi_bus_number: can't get _ADR issues and errors /dmesg follows/. > > I tried changing pnp os on/off, updated my bios to the most recent > release, disabled all integrated devices but the ethernet, im pretty > much out of ideas now. > > If there is any suggestion on what i could perhaphs do, it would be more > than welcome, and I gladly would supply any debug information required > in the process of the eventual tracking down of the error. > > I will plug a pci card in there for now, but this is not quite the > solution i would be looking for. Also, I presume the audio card is not > supported yet? It's to be some realtek chipset, also integrated, afaik.
Your network device just isn't supported yet: pcib3: <ACPI PCI-PCI bridge> at device 28.1 on pci0 pci4: <ACPI PCI bus> on pcib3 pci4: <network, ethernet> at device 0.0 (no driver attached) It may be very trivial to add support for it. Can you get the output of 'pciconf -lv' for the pci4:0:0 device? Also, do you know if this network adapter is supposed to be a 10/100 adapter or a 10/100/1000 (Gigabit)? -- John Baldwin <[EMAIL PROTECTED]> <>< http://www.FreeBSD.org/~jhb/ "Power Users Use the Power to Serve" = http://www.FreeBSD.org _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
