On Wed, 9 Feb 2005 13:08:27 +0100, Willy Offermans <[EMAIL PROTECTED]> wrote:
> Dear FreeBSD friends,
>
> I have sent the following e-mail 3 times before. I believe always to
> freebsd-hackers, but I'm not sure.
>
:
> I have an additional LPT port:
>
> [EMAIL PROTECTED]:13:0: class=0x078000 card=0x00101000 chip=0x98059710
> rev=0x01 hdr=0x00
> vendor = 'MosChip Semiconductors (Was: Netmos Technology)'
> device = 'Nm9805 PCI + 1284 Printer Port'
> class = simple comms
>
> I was able to get it work by adding the following to
> /usr/src/sys/dev/puc/pucdata.c
>
> /* Added by [EMAIL PROTECTED] 06/05/2004 */
> /* recommended by [EMAIL PROTECTED] */
>
> /* NetMos 0S1P PCI : 0S, 1P */
> { "NetMos NM9805 1284 Printer port",
> { 0x9710, 0x9805, 0, 0 },
> { 0xffff, 0xffff, 0, 0 },
> {
> { PUC_PORT_TYPE_LPT, 0x10, 0x00, 0x00 },
> },
> },
>
> and to enable the puc driver in the kernel of course.
>
> Is it possible to add the data to /usr/src/sys/dev/puc/pucdata.c permanently?
>
Just a FYI:
When you have an addition to the sources, you need to create a diff
between the original file and your modifications:
diff -u pucdata.c-orig pucdata.c > pucdata.diff
Then use send-pr to submit the update. You may also send a message to
freebsd-current or freebsd-stable with the PR number. This way your
patch won't get lost in the mailing lists. Then after a week to a
month if no-one has commited your patch, post a follow message.
Scot
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
