See if this fixes your problem.
Index: twa_cam.c
===================================================================
RCS file: /home/ncvs/src/sys/dev/twa/twa_cam.c,v
retrieving revision 1.1.2.4
diff -u -r1.1.2.4 twa_cam.c
--- twa_cam.c 7 Jan 2005 01:00:45 -0000 1.1.2.4
+++ twa_cam.c 26 Jan 2005 18:53:54 -0000
@@ -424,9 +424,9 @@
twa_dbg_dprint(3, sc, "XPT_PATH_INQ request");
path_inq->version_num = 1;
- path_inq->hba_inquiry = PI_WIDE_16;
+ path_inq->hba_inquiry = 0;
path_inq->target_sprt = 0;
- path_inq->hba_misc |= PIM_NOBUSRESET;
+ path_inq->hba_misc = 0;
path_inq->hba_eng_cnt = 0;
path_inq->max_target = TWA_MAX_UNITS;
path_inq->max_lun = 0;
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] Behalf Of Jason Thomson
> Sent: Wednesday, January 26, 2005 7:52 AM
> To: freebsd-stable@freebsd.org
> Cc: Vinod Kashyap
> Subject: 3ware 9500S problem in newly updated 4.x box.
>
>
> Recently CVSupped and rebuilt a releng4 box.
>
> This box has a 9500S in RAID10 configuration.
>
> On reboot, it failed to find da0, so it couldn't mount root.
>
> If you wait a few seconds, and then type to specify the root
> filesystem
> again, then the da0 device is found (the message is printed as you
> type), and on hitting return, the machine continues booting.
>
> (See dmesg below).
>
>
> The twa driver and firmware are up to date.
>
> This is a DELL 1600SC SMP. HyperThreading is enabled (but it's not a
> big deal to us one way or the other, so if it's a good idea
> to turn it
> off, we could).
>
> If you don't type on the keyboard, then the message doesn't
> appear. I
> haven't tried this without SMP. It's a production box I just
> upgraded,
> and can only mess around with it early in the morning.
>
> Before today, it was running FreeBSD 4-STABLE from September 24th.
>
> Has anyone else seen this? Does anyone have any ideas? Is there
> anything I can try to debug this?
>
>
>
>
>
>
>
> Copyright (c) 1992-2005 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992,
> 1993, 1994
> The Regents of the University of California. All
> rights reserved.
> FreeBSD 4.11-STABLE #3: Wed Jan 26 14:03:18 GMT 2005
> [EMAIL PROTECTED]:/usr/obj/usr/src/sys/BALDRICK
> Timecounter "i8254" frequency 1193182 Hz
> CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2790.72-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
>
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SE
P,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> Hyperthreading: 2 logical CPUs
> real memory = 3757965312 (3669888K bytes)
> avail memory = 3659362304 (3573596K bytes)
> Changing APIC ID for IO APIC #0 from 0 to 8 on chip
> Changing APIC ID for IO APIC #1 from 0 to 9 on chip
> Changing APIC ID for IO APIC #2 from 0 to 10 on chip
> Programming 16 pins in IOAPIC #0
> IOAPIC #0 intpin 2 -> irq 0
> Programming 16 pins in IOAPIC #1
> Programming 16 pins in IOAPIC #2
> FreeBSD/SMP: Multiprocessor motherboard: 4 CPUs
> cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee00000
> cpu1 (AP): apic id: 1, version: 0x00050014, at 0xfee00000
> cpu2 (AP): apic id: 6, version: 0x00050014, at 0xfee00000
> cpu3 (AP): apic id: 7, version: 0x00050014, at 0xfee00000
> io0 (APIC): apic id: 8, version: 0x000f0011, at 0xfec00000
> io1 (APIC): apic id: 9, version: 0x000f0011, at 0xfec01000
> io2 (APIC): apic id: 10, version: 0x000f0011, at 0xfec02000
> pnpbios: Bad PnP BIOS data checksum
> Preloaded elf kernel "kernel" at 0xa03f0000.
> Warning: Pentium 4 CPU: PSE disabled
> Pentium Pro MTRR support enabled
> md0: Malloc disk
> Using $PIR table, 9 entries at 0xa00fc200
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> pcib0: <ServerWorks host to PCI bridge(unknown chipset)> on
> motherboard
> IOAPIC #1 intpin 0 -> irq 2
> IOAPIC #1 intpin 9 -> irq 3
> pci0: <PCI bus> on pcib0
> em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port
> 0xecc0-0xecff mem 0xfe100000-0xfe11ffff irq 2 at device 2.0 on pci0
> em0: Speed:N/A Duplex:N/A
> sis0: <NatSemi DP83815 10/100BaseTX> port 0xe800-0xe8ff mem
> 0xfe122000-0xfe122fff irq 3 at device 4.0 on pci0
> sis0: Ethernet address: 00:02:e3:02:6e:10
> miibus0: <MII bus> on sis0
> ukphy0: <Generic IEEE 802.3u media interface> on miibus0
> ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> pci0: <ATI Mach64-GR graphics accelerator> at 14.0
> atapci0: <ServerWorks CSB5 ATA100 controller> port
> 0x8b0-0x8bf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device
> 15.1 on pci0
> ata0: at 0x1f0 irq 14 on atapci0
> ata1: at 0x170 irq 15 on atapci0
> pci0: <OHCI USB controller> at 15.2 irq 5
> isab0: <PCI to ISA bridge (vendor=1166 device=0225)> at
> device 15.3 on pci0
> isa0: <ISA bus> on isab0
> pcib1: <ServerWorks host to PCI bridge(unknown chipset)> on
> motherboard
> IOAPIC #1 intpin 4 -> irq 10
> pci1: <PCI bus> on pcib1
> 3ware device driver for 9000 series storage controllers, version:
> 2.40.02.011
> twa0: <3ware 9000 series Storage Controller> port 0xdc00-0xdcff mem
> 0xfc000000-0xfc7fffff,0xfcf00000-0xfcf000ff irq 10 at device
> 6.0 on pci1
> twa0: 4 ports, Firmware FE9X 2.04.00.005, BIOS BE9X 2.03.01.047
> pcib2: <Host to PCI bridge> on motherboard
> pci2: <PCI bus> on pcib2
> pcib3: <ServerWorks host to PCI bridge(unknown chipset)> on
> motherboard
> pci3: <PCI bus> on pcib3
> pcib4: <ServerWorks host to PCI bridge(unknown chipset)> on
> motherboard
> pci4: <PCI bus> on pcib4
> orm0: <Option ROMs> at iomem
> 0xc0000-0xc7fff,0xc8000-0xc97ff,0xe3000-0xea7ff,0xec000-0xefff
> f on isa0
> pmtimer0 on isa0
> fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6
> drq 2 on isa0
> fdc0: FIFO enabled, 8 bytes threshold
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
> 0xa0000-0xbffff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A
> sio1: configured irq 3 not in bitmap of probed irqs 0
> ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
> ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/8 bytes threshold
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> APIC_IO: Testing 8254 interrupt delivery
> APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0
> intpin 2
> APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
> IP packet filtering initialized, divert enabled, rule-based forwarding
> enabled, default to deny, logging limited to 1000
> packets/entry by default
> IPsec: Initialized Security Association Processing.
> SMP: AP CPU #2 Launched!
> SMP: AP CPU #1 Launched!
> SMP: AP CPU #3 Launched!
> acd0: CDROM <SAMSUNG CD-ROM SC-148A> at ata1-master PIO4
> Mounting root from ufs:/dev/da0s1a
> no such device 'da'
> setrootbyname failed
> ffs_mountroot: can't find rootvp
> Root mount failed: 6
>
> Manual root filesystem specification:
> <fstype>:<device> Mount <device> using filesystem <fstype>
> eg. ufs:/dev/da0s1a
> ? List valid disk boot devices
> <empty line> Abort manual input
>
> mountroot> ufs\^[[}\^[[}:/dev/da0s1a
> Mounting root from ufs\^[[}\^[[}:/dev/da0s1a
> ffs_mountroot: can't find rootvp
> Root mount failed: 6
>
> Manual root filesystem specification:
> <fstype>:<device> Mount <device> using filesystem <fstype>
> eg. ufs:/dev/da0s1a
> ? List valid disk boot devices
> <empty line> Abort manual input
>
> mountroot> da0 at twa0 bus 0 target 0 lun 0
> da0: <3ware Logical Disk 00 1.00> Fixed Direct Access SCSI-0 device
> da0: 100.000MB/s transfers
> da0: 381448MB (781205504 512 byte sectors: 255H 63S/T 48627C)
> ufs:/dev/da0s1a
> Mounting root from ufs:/dev/da0s1a
> ohci0: <OHCI (generic) USB controller> mem 0xfe120000-0xfe120fff irq 5
> at device 15.2 on pci0
> usb0: OHCI version 1.0, legacy support
> usb0: SMM does not respond, resetting
> usb0: <OHCI (generic) USB controller> on ohci0
> usb0: USB revision 1.0
> uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> em0: Link is up 100 Mbps Full Duplex
>
>
>
> _______________________________________________
> freebsd-stable@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to
> "[EMAIL PROTECTED]"
>
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
