Hi, I'm looking at the same issue with a Serveraid 6i in an xSeries x226. In hindsight, I should have specified an iir controller, possibly with some machine other than an IBM!
There seems to be an ioctl where a user mode program can issue a command to the controller to find out what is going on. Is there any documentation available for this? I've started to experiment, but I haven't done much yet. Regards, Jan Mikkelsen. > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Scott Long > Sent: Sunday, 2 January 2005 2:55 AM > To: Jeroen Molinger > Cc: [EMAIL PROTECTED]; Rong-En Fan; [EMAIL PROTECTED] > Subject: Re: IBM ServeRAID 7k & 5.3 > > > Jeroen Molinger wrote: > > Rong-En Fan wrote: > > > >> [just for a record] > >> > >> Hi all, > >> > >> It seems ips(4) doesn't support ServeRAID 7k, however I just > >> installed 5.3-RELEASE/i386 on IBM x236 which has ServeRAID > >> 7k installed. Everything looks fine here (I'm running RAID-5 over > >> 4 HDDs). > >> > >> A little problem is that once a HDD fails, FreeBSD doesn't > >> know that unless I reboot it and saw the ips state is DEGRADED. > >> > >> > >> pciconf & dmesg are listed as below: > >> > >> [EMAIL PROTECTED]:14:0: class=0x010400 card=0x028e1014 chip=0x02509005 > >> rev=0x07 hdr=0x00 > >> vendor = 'Adaptec Inc' > >> class = mass storage > >> subclass = RAID > >> > >> ips0: <Adaptec ServeRAID Adapter> mem > 0xcfffd000-0xcfffdfff irq 38 at > >> device 14.0 on pci3 > >> ips0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xcfffd000 > >> ips0: [GIANT-LOCKED] > >> ips0: logical drives: 1 > >> ips0: Logical Drive 0: RAID5 sectors: 430116864, state OK > >> ipsd0: <Logical Drive> on ips0 > >> ipsd0: Logical Drive (210018MB) > >> > >> Regards, > >> Rong-En Fan > >> _______________________________________________ > >> [EMAIL PROTECTED] mailing list > >> http://lists.freebsd.org/mailman/listinfo/freebsd-scsi > >> To unsubscribe, send any mail to > "[EMAIL PROTECTED]" > >> > >> > >> > >> > > Hai Scott, > > > > Do you know when the 7K will be fully supported. I got a > note from IBM > > that they will discontinue the ServerRAID 6M series. > > > > Best Regards > > > > Jeroen Molinger > > I guess that by 'support' that you are referring to the > problem with it > not seeing a failed drive? I really have no idea how that is supposed > to work, if at all. > > Scott > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to > "[EMAIL PROTECTED]" > _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
