On Sun, 2 Jan 2005 10:18, Miguel Saturnino wrote: > The relevant part of my kernel configuration file: > > device ata > device atadisk # ATA disk drives > #device atapicd # ATAPI CDROM drives > options ATA_STATIC_ID # Static device numbering > device atapicam > > device scbus # SCSI bus (required for SCSI) > device cd # CD > device pass # Passthrough device (direct SCSI ... > device da # Direct Access (disks) > > > [EMAIL PROTECTED] # tail /var/run/dmesg.boot > ata0-master: DMA limited to UDMA33, non-ATA66 cable or device > ata0-slave: DMA limited to UDMA33, non-ATA66 cable or device > ad0: 38166MB <ST340014A/3.06> [77545/16/63] at ata0-master UDMA33 > ad1: 19092MB <ST320410A/3.34> [38792/16/63] at ata0-slave UDMA33 > acd0: CDRW <SAMSUNG CD-R/RW SW-240B/R403> at ata1-master PIO4 > da0 at umass-sim0 bus 0 target 0 lun 0 > da0: <IOMEGA ZIP 100 79.E> Removable Direct Access SCSI-0 device > da0: 1.000MB/s transfers > da0: 96MB (196608 512 byte sectors: 64H 32S/T 96C) > Mounting root from ufs:/dev/ad1s1a
If you took atapicd out of your kernel there shouuld be no acd entry but there is, so I'd conclude that you did not build and/or install your new kernel correctly. Note that it is OK to have both atapicam and atapicd in the same kernel (although each CDROM shows up twice) > > [EMAIL PROTECTED] # uname -a > FreeBSD furao.diabretes 5.3-STABLE FreeBSD 5.3-STABLE #6: Sat Jan 1 > 16:49:40 WET 2005 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC > i386 > > [EMAIL PROTECTED] # atacontrol list > ATA channel 0: > Master: ad0 <ST340014A/3.06> ATA/ATAPI revision 6 > Slave: ad1 <ST320410A/3.34> ATA/ATAPI revision 6 > ATA channel 1: > Master: acd0 <SAMSUNG CD-R/RW SW-240B/R403> ATA/ATAPI revision 5 > Slave: no device present > > [EMAIL PROTECTED] # camcontrol devlist > <IOMEGA ZIP 100 79.E> at scbus0 target 0 lun 0 (da0,pass0) > > [EMAIL PROTECTED] # cdrecord -scanbus > Cdrecord-Clone 2.01 (i386-unknown-freebsd5.3) Copyright (C) 1995-2004 Jörg > Schilling Using libscg version 'schily-0.8'. > scsibus0: > 0,0,0 0) 'IOMEGA ' 'ZIP 100 ' '79.E' Removable Disk > 0,1,0 1) * > 0,2,0 2) * > 0,3,0 3) * > 0,4,0 4) * > 0,5,0 5) * > 0,6,0 6) * > 0,7,0 7) * > > > > Any sugestions? > TIA! > > Miguel > > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "[EMAIL PROTECTED]" -- Daniel O'Connor software and network engineer for Genesis Software - http://www.gsoft.com.au "The nice thing about standards is that there are so many of them to choose from." -- Andrew Tanenbaum GPG Fingerprint - 5596 B766 97C0 0E94 4347 295E E593 DC20 7B3F CE8C
pgpF1kxa2L8l7.pgp
Description: PGP signature
