Brian, See http://www.xl0.org/FreeBSD/13-12-04.html#ite-it8212f-gigabyte-raid-controlle r-supported
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Brian Szymanski Sent: 31. december 2004 01:52 To: freebsd-stable@freebsd.org Subject: iTE IT8212 card/ata problems Hello... FreeBSD 5.3 on x86 I've installed an addon ATA card, an IT8212(F), and it comes in at bios time, detects drives and such, but freebsd doesn't see it on booting. I thought maybe this was because no drives were attached, but no dice with a drive attached (even though the card sees this drive at boot time). My system has a somewhat unusual ATA situation - a built in 2-port ATA controller, another built in 2-port SATA controller, and now this card (2 port ATA as well). Is it possible that freebsd just doesn't expect so many ata devices, or is the card just not supported? I don't see it in hardware-i386.html, but generic ata cards have worked for me in the past - was I just been getting lucky before? Thanks for any ideas. Cheers, Brian Szymanski [EMAIL PROTECTED] _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]" _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
