On Wed, 1 Dec 2004, Mike Jakubik wrote: > Hi, > > I am getting the following errors on the GigaByte GA-K8VM800M Motherboard. > The system seems to run fine however. Latest BIOS installed.
Either there's a bug in our ACPI code or their ACPI bytecode was not generated for amd64. If you are running the latest BIOS, then turning ACPI off will shut up the errors. > > --- > > Copyright (c) 1992-2004 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 5.3-RELEASE #0: Fri Nov 5 03:50:01 UTC 2004 > [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC > ACPI APIC Table: <VIAK8 AWRDACPI> > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: AMD Athlon(tm) 64 Processor 2800+ (1799.95-MHz K8-class CPU) > Origin = "AuthenticAMD" Id = 0xfc0 Stepping = 0 > > Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> > AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow> > real memory = 469696512 (447 MB) > avail memory = 442269696 (421 MB) > ioapic0 <Version 0.3> irqs 0-23 on motherboard > acpi0: <VIAK8 AWRDACPI> on motherboard > acpi0: Power Button (fixed) > ACPI-0502: *** Error: Handler for [SystemMemory] returned > AE_AML_ALIGNMENT > ACPI-1303: *** Error: Method execution failed [\\_SB_.MEM_._CRS] (Node > 0xffffff00009b0cc0), AE_AML_ALIGNMENT > ACPI-0239: *** Error: Method execution failed [\\_SB_.MEM_._CRS] (Node > 0xffffff00009b0cc0), AE_AML_ALIGNMENT > can't fetch resources for \\_SB_.MEM_ - AE_AML_ALIGNMENT > ACPI-0502: *** Error: Handler for [SystemMemory] returned > AE_AML_ALIGNMENT > ACPI-1303: *** Error: Method execution failed [\\_SB_.PCI0._CRS] (Node > 0xffffff00009b09c0), AE_AML_ALIGNMENT > ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0._CRS] (Node > 0xffffff00009b09c0), AE_AML_ALIGNMENT > can't fetch resources for \\_SB_.PCI0 - AE_AML_ALIGNMENT > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 > cpu0: <ACPI CPU> on acpi0 > acpi_button0: <Power Button> on acpi0 > pcib0: <ACPI Host-PCI bridge> on acpi0 > pci0: <ACPI PCI bus> on pcib0 > ACPI-0502: *** Error: Handler for [SystemMemory] returned > AE_AML_ALIGNMENT > ACPI-1303: *** Error: Method execution failed [\\_SB_.PCI0._CRS] (Node > 0xffffff00009b09c0), AE_AML_ALIGNMENT > ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0._CRS] (Node > 0xffffff00009b09c0), AE_AML_ALIGNMENT > ACPI-0502: *** Error: Handler for [SystemMemory] returned > AE_AML_ALIGNMENT > ACPI-1303: *** Error: Method execution failed [\\_SB_.PCI0._CRS] (Node > 0xffffff00009b09c0), AE_AML_ALIGNMENT > ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0._CRS] (Node > 0xffffff00009b09c0), AE_AML_ALIGNMENT > ACPI-0502: *** Error: Handler for [SystemMemory] returned > AE_AML_ALIGNMENT > ACPI-1303: *** Error: Method execution failed [\\_SB_.PCI0._CRS] (Node > 0xffffff00009b09c0), AE_AML_ALIGNMENT > ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0._CRS] (Node > 0xffffff00009b09c0), AE_AML_ALIGNMENT > ACPI-0502: *** Error: Handler for [SystemMemory] returned > AE_AML_ALIGNMENT > ACPI-1303: *** Error: Method execution failed [\\_SB_.PCI0._CRS] (Node > 0xffffff00009b09c0), AE_AML_ALIGNMENT > ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0._CRS] (Node > 0xffffff00009b09c0), AE_AML_ALIGNMENT > ACPI-0502: *** Error: Handler for [SystemMemory] returned > AE_AML_ALIGNMENT > ACPI-1303: *** Error: Method execution failed [\\_SB_.PCI0._CRS] (Node > 0xffffff00009b09c0), AE_AML_ALIGNMENT > ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0._CRS] (Node > 0xffffff00009b09c0), AE_AML_ALIGNMENT > ACPI-0502: *** Error: Handler for [SystemMemory] returned > AE_AML_ALIGNMENT > ACPI-1303: *** Error: Method execution failed [\\_SB_.PCI0._CRS] (Node > 0xffffff00009b09c0), AE_AML_ALIGNMENT > ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0._CRS] (Node > 0xffffff00009b09c0), AE_AML_ALIGNMENT > ACPI-0502: *** Error: Handler for [SystemMemory] returned > AE_AML_ALIGNMENT > ACPI-1303: *** Error: Method execution failed [\\_SB_.PCI0._CRS] (Node > 0xffffff00009b09c0), AE_AML_ALIGNMENT > ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0._CRS] (Node > 0xffffff00009b09c0), AE_AML_ALIGNMENT > ACPI-0502: *** Error: Handler for [SystemMemory] returned > AE_AML_ALIGNMENT > ACPI-1303: *** Error: Method execution failed [\\_SB_.PCI0._CRS] (Node > 0xffffff00009b09c0), AE_AML_ALIGNMENT > ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0._CRS] (Node > 0xffffff00009b09c0), AE_AML_ALIGNMENT > ACPI-0502: *** Error: Handler for [SystemMemory] returned > AE_AML_ALIGNMENT > ACPI-1303: *** Error: Method execution failed [\\_SB_.PCI0._CRS] (Node > 0xffffff00009b09c0), AE_AML_ALIGNMENT > ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0._CRS] (Node > 0xffffff00009b09c0), AE_AML_ALIGNMENT > ACPI-0502: *** Error: Handler for [SystemMemory] returned > AE_AML_ALIGNMENT > ACPI-1303: *** Error: Method execution failed [\\_SB_.PCI0._CRS] (Node > 0xffffff00009b09c0), AE_AML_ALIGNMENT > ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0._CRS] (Node > 0xffffff00009b09c0), AE_AML_ALIGNMENT > ACPI-0502: *** Error: Handler for [SystemMemory] returned > AE_AML_ALIGNMENT > ACPI-1303: *** Error: Method execution failed [\\_SB_.PCI0._CRS] (Node > 0xffffff00009b09c0), AE_AML_ALIGNMENT > ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0._CRS] (Node > 0xffffff00009b09c0), AE_AML_ALIGNMENT > ACPI-0502: *** Error: Handler for [SystemMemory] returned > AE_AML_ALIGNMENT > ACPI-1303: *** Error: Method execution failed [\\_SB_.PCI0._CRS] (Node > 0xffffff00009b09c0), AE_AML_ALIGNMENT > ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0._CRS] (Node > 0xffffff00009b09c0), AE_AML_ALIGNMENT > pcib1: <PCI-PCI bridge> at device 1.0 on pci0 > pci1: <PCI bus> on pcib1 > pci1: <display, VGA> at device 0.0 (no driver attached) > atapci0: <VIA 6420 SATA150 controller> port > 0xe400-0xe4ff,0xe000-0xe00f,0xdc00-0xdc03,0xd800-0xd807,0xd400-0xd403,0xd000-0xd007 > irq 20 at device 15.0 on pci0 > ata2: channel #0 on atapci0 > ata3: channel #1 on atapci0 > atapci1: <VIA 8237 UDMA133 controller> port > 0xe800-0xe80f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0 > ata0: channel #0 on atapci1 > ata1: channel #1 on atapci1 > isab0: <PCI-ISA bridge> at device 17.0 on pci0 > isa0: <ISA bus> on isab0 > rl0: <RealTek 8139 10/100BaseTX> port 0xec00-0xecff mem > 0xea000000-0xea0000ff irq 18 at device 19.0 on pci0 > miibus0: <MII bus> on rl0 > rlphy0: <RealTek internal media interface> on miibus0 > rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > rl0: Ethernet address: 00:0f:ea:31:2d:71 > fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on > acpi0 fdc0: [FAST] > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on > acpi0 sio0: type 16550A > sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: > type 16550A > ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0 > ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode > ppbus0: <Parallel port bus> on ppc0 > plip0: <PLIP network interface> on ppbus0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > Timecounter "TSC" frequency 1799954748 Hz quality 800 > Timecounters tick every 0.976 msec > ad4: 190782MB <WDC WD2000JD-00HBB0/08.02D08> [387621/16/63] at ata2-master > SATA150 > ad6: 190782MB <WDC WD2000JD-00HBB0/08.02D08> [387621/16/63] at ata3-master > SATA150 > Mounting root from ufs:/dev/ad4s1a > > Thanks. > > > > > _______________________________________________ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "[EMAIL PROTECTED]" > -- Doug White | FreeBSD: The Power to Serve [EMAIL PROTECTED] | www.FreeBSD.org _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
