I don't know if this is the proper email list, however, I thought I would give it a go.
Here is the problem: I have a Sony 710A DVD burner. The box is running 4.10 and I put all the neccessary options in my kernel config file and rebuilt everyting. The drive is seen by the OS. I can mount it using a normal CD-R. But when I try to use it for a burner, it doesn't work (get a bad ioctl message). When I run camcontrol devlist, the drive shows up on bus 2. But, when I run cdrecord, bus 2 is not seen. Camcontrol reports the device (/dev/adc0a) is using pass4. But there is no /dev/pass4 device in /dev. The message i get is inapproriate ioctl. Driving me nuts. Thoughts/pointers/questions are greatly appreciated. Best regards, Donald ----- Original Message ----- From: "Vlad Manilici" <[EMAIL PROTECTED]> To: "Erik Trulsson" <[EMAIL PROTECTED]> Cc: <[EMAIL PROTECTED]> Sent: Sunday, November 21, 2004 5:25 PM Subject: Re: CVS/cvsup problems (ports/74157) > > I use CVS to check out from my own local copy of the repository (which > > it seems you do too.) I use CVSup to keep my local copy of the > > repository updated (cvsuping from cvsup.dk.freebsd.org) > > Me wrong, I found it in the Handbook: > > A.5.5: > > cvs-all release=cvs > > Thanks & CU, > Vlad > > _______________________________________________ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "[EMAIL PROTECTED]" > _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
