On Wednesday 17 November 2004 04:40 am, Krzysztof Kowalik wrote: > Hello, > > Recently I took some time to upgrade my home 4.9 system to > 5.3-RELEASE (fortunately, taking full system dump before, so I can > easily get back). In fact just after upgrading I ran into the weird > issue during installation for firefox port. > > When firefox-1.0-source.tar.bz2 is getting untared, the system starts to > be *slow*: any music starts to be jittered and the cursor in X stalls > from time to time for ~1 second. > > And I never had this issue before with 4.x serie. > > I tried to boot with an without ACPI, with GENERIC kernel, with my "own" > kernel configuration (GENERIC with removed unused SCSI/RAID/NIC drivers) > both with and without PREEMPTION[1]. Without any visible change in > system's behaviour. > > %uname -a > FreeBSD bzzzt.borys.lan 5.3-RELEASE FreeBSD 5.3-RELEASE #2: Wed Nov 17 > 00:19:56 CET 2004 [EMAIL PROTECTED]:/usr/src/sys/i386/compile/BZZZT > i386 > > # atacontrol list > ATA channel 0: > Master: ad0 <SAMSUNG SP1614N/TM100-24> ATA/ATAPI revision 7 > Slave: ad1 <WDC WD2000JB-00FUA0/15.05R15> ATA/ATAPI revision 6 > ATA channel 1: > Master: acd0 <JLMS DVD-ROM LTD-166S/DS08> ATA/ATAPI revision 5 > Slave: acd1 <LITE-ON LTR-40125S/ZS0N> ATA/ATAPI revision 0 > ATA channel 2: > Master: ad4 <ST360021A/3.10> ATA/ATAPI revision 5 > Slave: ad5 <ST380021A/3.19> ATA/ATAPI revision 5 > ATA channel 3: > Master: no device present > Slave: no device present > > # atacontrol mode 0 > Master = UDMA100 > Slave = UDMA100 > # atacontrol mode 1 > Master = UDMA33 > Slave = UDMA33 > # atacontrol mode 2 > Master = UDMA100 > Slave = UDMA100 > > dmesgs from ACPI boot on "custom" kernel attached. > > Is there anything I missed and therefore I should try/tune or any > other informations that are needed and I missed them? > > [1] yes, SCHED_4BSD > > Regards, > Krzysztof Kowalik Me too.
-- Anish Mistry
pgpo0niUjMFCh.pgp
Description: PGP signature
