I have the same Lexar Jumpdrive and it seems to work for me on an Asus P4PE with intel EHCI driver, as long as I plug it in AFTER booting.
however: It hangs if I have the drive in during boot. It doesn't seem to give me the speed I get on another system
BTW the speeds are:
low speed (1.5Mb/Sec)
full speed (12Mb/sec)
high speed (480Mb/sec)
I'm working on the USB code at the moment so I'm hoping to gete it fixed.
-- original message:
Hello,
I have an ASUS P4C-800-E Deluxe Motherboard, P4 3.0GHz processor with builtin USB 2.0 controllers.
I am having a problem with the Lexar Media JumpDrive 2.0 Pro 256M memory keystick.
usbd nevers sees it. I finally went into BIOS and set the Speed for the USB 2.0 Controller to FullSpeed (maybe HighSpeed, in whatever case its 12MBps as opposed to 240MBps). When setting it to 12MBps, usbd sees the drive and attaches it. Setting the speed to higher, usbd does NOT attach it.
I don't know how the Bios is connecte with this...
Also NOTE: I have a SIIG SlimHub 2.0 4 ports, that I can not attach my JumpDrive too. I must set the speed to 12MBps and attach it directly to a
port on my PC to get it to see it.
Any help in this would be appreciated.
Thanks! Michael E. Mercer
My system is the latest 4.9-Stable build as of yesterday.
I committed some relevant stuff yesterday. make sure you have that..
--
+------------------------------------+ ______ _ __
| __--_|\ Julian Elischer | \ U \/ / hard at work in
| / \ [EMAIL PROTECTED] +------>x USA \ a very strange
| ( OZ ) \___ ___ | country !
+- X_.---._/ presently in San Francisco \_/ \\
v_______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
