On Tue, 27 Jan 2004, Matti Saarinen wrote: > > I have IBM x345 which has integrated LSI 1030 raid controller. I don't > know if the problem is in the driver or do I have malfunctioning > hardware. Many times but not all, when the system boots the console > output contains almost denumerable number of the following lines: > > mpt0: EvtLogData: Event Data:mpt0: 05020012mpt0: > mpt0: EvtLogData: IOCLogInfo: 0x110a0000 > mpt0: EvtLogData: Event Data:mpt0: 05020012mpt0: > mpt0: EvtLogData: IOCLogInfo: 0x110a0000 > > > At the same time the activity leds of the disks da9 and da10 are > contantly lit.
Not sure the events are related, but it does appear that you have the mpt driver's debugging enabled. Have you been booting with -v, or have the mpt_debug kernel environment variable set in loader.conf, or setting something in sysctl.conf? The lights-on thing would seem to be some sort of bus freeze, like a BDR from a device. Since you're using a disk enclosure, is it reporting any problems accessing any of its disks? perhaps there's a bad cable or device going down in the enclosure? I have an x335 here, which is the ATA version of the x345, yet the MPT is still on the board. I plugged it into a couple of disks for testing and it worked, except if I enabled the Integrated Mirroring (IM) which requires OS support. -- Doug White | FreeBSD: The Power to Serve [EMAIL PROTECTED] | www.FreeBSD.org _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
