Hi,
From: "ict technician" <[EMAIL PROTECTED]>
>
> Where's the other CPU?
> What's da0 - send dmesg output
The other CPU is sure active, at least when I look at things with top.
da0 is another pair of disks, but older ones. I don't expect them
to perform that well.
Here is dmesg:
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.8-RELEASE-p13 #2: Mon Oct 6 12:15:38 EEST 2003
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (498.75-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x673 Stepping = 3
Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 268369920 (262080K bytes)
avail memory = 257400832 (251368K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc0353000.
Pentium Pro MTRR support enabled
Using $PIR table, 8 entries at 0xc00fdf40
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> on motherboard
IOAPIC #0 intpin 17 -> irq 2
IOAPIC #0 intpin 21 -> irq 5
IOAPIC #0 intpin 22 -> irq 9
IOAPIC #0 intpin 20 -> irq 10
IOAPIC #0 intpin 19 -> irq 11
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=1044 device=a500)> at device 12.0 on pci0
pci1: <PCI bus> on pcib1
asr0: <Adaptec Caching SCSI RAID> mem 0xf8000000-0xfbffffff irq 2 at device
12.1 on pci0
asr0: major=154
asr0: DPT PM2654U2 FW Rev. 3010, 1 channel, 256 CCBs, Protocol I2O
sym0: <875> port 0x1400-0x14ff mem
0xf4200000-0xf4200fff,0xf4204000-0xf42040ff irq 5 at device 13.0 on pci0
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
sym1: <875> port 0x1800-0x18ff mem
0xf4201000-0xf4201fff,0xf4204400-0xf42044ff irq 9 at device 13.1 on pci0
sym1: No NVRAM, ID 7, Fast-20, SE, parity checking
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x1060-0x107f mem
0xf4000000-0xf40fffff,0xf4205000-0xf4205fff irq 10 at device 15.0 on pci0
fxp0: Ethernet address 00:90:27:6a:95:e3
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0x1080-0x10bf mem
0xf4100000-0xf41fffff,0xf4202000-0xf4202fff irq 11 at device 16.0 on pci0
fxp1: Ethernet address 00:90:27:43:be:59
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <Intel 82371AB PCI to ISA bridge> at device 18.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x1050-0x105f at device 18.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x10c0-0x10df irq 9 at
device 18.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Timecounter "PIIX" frequency 3579545 Hz
chip1: <Intel 82371AB Power management controller> port 0x1040-0x104f at
device 18.3 on pci0
pci0: <Cirrus Logic GD5480 SVGA controller> at 20.0
orm0: <Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xc87ff,0xc8800-0xc8fff,0xc9000-0xc9fff,0xca000-0xce
fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
ata0-slave: ATAPI identify retries exceeded
SMP: AP CPU #1 Launched!
acd0: DVD-ROM <TOSHIBA DVD-ROM SD-M1302> at ata0-master PIO4
Waiting 5 seconds for SCSI devices to settle
sa0 at sym1 bus 0 target 5 lun 0
sa0: <HP C1537A L907> Removable Sequential Access SCSI-2 device
sa0: 10.000MB/s transfers (10.000MHz, offset 16)
pass2 at asr0 bus 0 target 6 lun 0
pass2: <ESG-SHV SCA HSBP M7 0.12> Fixed Processor SCSI-2 device
da0 at asr0 bus 0 target 0 lun 0
da0: <DPT RAID-1 3010> Fixed Direct Access SCSI-2 device
da0: 8748MB (17915904 512 byte sectors: 255H 63S/T 1115C)
da1 at asr0 bus 0 target 2 lun 0
da1: <DPT RAID-1 3010> Fixed Direct Access SCSI-2 device
da1: 70149MB (143665152 512 byte sectors: 255H 63S/T 8942C)
Mounting root from ufs:/dev/da0s1a
Ari S.
_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
