Readers,
I am having trouble burning CD-R's with the following:
[EMAIL PROTECTED] ~ $ uname -a FreeBSD mahoney.remote.comnet.co.nz
4.9-STABLE FreeBSD 4.9-STABLE #0: Wed Oct 29 23:33:11 NZDT 2003
[EMAIL PROTECTED]:/usr/home/obj/usr/src/sys/GENERIC
i386
mahoney# atacontrol list
ATA channel 0:
Master: ad0 <Maxtor 6E030L0/NAR61590> ATA/ATAPI rev 7
Slave: no device present
ATA channel 1:
Master: acd0 <CRW1232/1.20> ATA/ATAPI rev 0
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Slave: afd0 <IOMEGA ZIP 250 ATAPI Floppy/51.G> ATA/ATAPI rev 0
[EMAIL PROTECTED] ~ $ dmesg -a | less
[snip]
acd0: CD-RW <CRW1232> at ata1-master WDMA2
Typical messages follow this pattern:
[EMAIL PROTECTED] ~ $ /usr/home/rbm49/bin/backup-scan
Warning: creating filesystem that does not conform to ISO-9660.
5.90% done, estimate finish Sat Dec 20 21:10:32 2003
11.79% done, estimate finish Sat Dec 20 21:10:41 2003
17.68% done, estimate finish Sat Dec 20 21:10:27 2003
23.58% done, estimate finish Sat Dec 20 21:10:24 2003
29.47% done, estimate finish Sat Dec 20 21:10:19 2003
35.37% done, estimate finish Sat Dec 20 21:10:15 2003
41.25% done, estimate finish Sat Dec 20 21:10:15 2003
47.13% done, estimate finish Sat Dec 20 21:10:35 2003
53.04% done, estimate finish Sat Dec 20 21:10:40 2003
58.93% done, estimate finish Sat Dec 20 21:10:41 2003
64.82% done, estimate finish Sat Dec 20 21:10:39 2003
70.70% done, estimate finish Sat Dec 20 21:10:37 2003
76.60% done, estimate finish Sat Dec 20 21:10:36 2003
82.50% done, estimate finish Sat Dec 20 21:10:35 2003
88.39% done, estimate finish Sat Dec 20 21:10:36 2003
94.28% done, estimate finish Sat Dec 20 21:10:36 2003
Total translation table size: 0
Total rockridge attributes bytes: 92650
Total directory bytes: 200704
Path table size(bytes): 502
Max brk space used c3664
84864 extents written (165 Mb)
next writeable LBA 0
writing from file /usr/home/share/temp/rbm49/scan.iso size 169728 KB
written this track 129184 KB (76%) total 129184 KB
only wrote -1 of 32768 bytes err=5
burncd: ioctl(CDRIOCFLUSH): Input/output error
The script I am using is:
[EMAIL PROTECTED] ~ $ cat bin/backup-scan
#!/bin/sh
#
# /usr/home/rbm49/bin/backup-scan
#
/usr/local/bin/mkisofs -U -R \
-o /usr/home/share/temp/rbm49/scan.iso /usr/home/scan && \
/usr/sbin/burncd -s max -f /dev/acd0c data /usr/home/share/temp/rbm49/scan.iso fixate
&& \
rm -f /usr/home/share/temp/rbm49/scan.iso && exit 0
exit 2
Do any readers have any idea what the issue may be. This problem has
been occuring on and off for a while but appears to be becoming worse.
Best regards,
Richard MAHONEY
--
Richard MAHONEY | internet: homepages.comnet.net.nz/~r-mahoney
Littledene | telephone / telefax: ++64 3 312 1699
Bay Road | cellular: ++64 25 829 986
OXFORD, NZ | e-mail: [EMAIL PROTECTED]
_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
