Hi, I have a little problem with dc10, dc11. I use three quad dc cards, so far from dc0 up to dc8 with no problems.
All (dc0 to dc11) are displayed correctly with pciconf and with ifconfig. The trouble is with dc10 and dc11 that they don't send any data out and also don't react to arp requests etc. - at least using tcpdump won't show anything coming in or going out. Monitoring from an external system, this is the same. According to the blinkinglights on the switch in between (also tried a hub), pings from the other machine (or arp-requests if I don't use a permanent entry) etc are send to the correct cable. As everything works from dc0 up to dc9, I'd suspect some sort of internal name mismatching (like counting devices hexadecimal (dca) versus decimal (dc10)). This is on an older system (4.6-STABLE). If someone had a similar problem and it is now fixed in 4.8-STABLE, please let me know. Couldn't find a PR for this... Regards, Holger Kipp -- Holger Kipp, Dipl.-Math., Systemadministrator | alogis AG Fon: +49 (0)30 / 43 65 8 - 114 | Berliner Strasse 26 Fax: +49 (0)30 / 43 65 8 - 214 | D-13507 Berlin Tegel email: [EMAIL PROTECTED] | http://www.alogis.com _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
