Hi All Just to confirm that I now have the Matrox G450 Dual head up and running, just with no DRI on the second head, no real loss. As was pointed out part of the problem was some sillyness on my part, loading the agp.ko module, and having it compiled into kernel. Once that was fixed, XF86Config needed some small tweeks, and then all started working.
Barry -- Barry Irwin [EMAIL PROTECTED] Tel: +27214875178 Systems Administrator: Networks And Security iTouch Technology iTouch TAS http://www.itouchlabs.com Mobile: +27824457210 ----- Original Message ----- From: "Vladislav V. Zhuk" <[EMAIL PROTECTED]> To: "Eric Anholt" <[EMAIL PROTECTED]> Cc: <[EMAIL PROTECTED]> Sent: Thursday, May 22, 2003 10:45 AM Subject: Re: Problex with Matrox G450 and XFree86 4.3.0 on 4.8-STABLE > On Sun, May 11, 2003 at 12:27:48AM -0700, Eric Anholt wrote: > > [ ... ] > > > > Markers: (--) probed, (**) from config file, (==) default setting, > > > (++) from command line, (!!) notice, (II) informational, > > > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > > > (==) Log file: "/var/log/XFree86.0.log", Time: Thu May 8 14:36:26 2003 > > > (==) Using config file: "/etc/X11/XF86Config" > > > (EE) MGA: Failed to load module "mga_hal" (module does not exist, 0) > > > (EE) MGA: Failed to load module "mga_hal" (module does not exist, 0) > > > (EE) MGA(1): Not initializing the DRI on the second head > > > > > > I cant find any reference to the mga_hal module. I know that Previously I > > > needed to build the X Server with GXX_MATROX enable to use the matrox > > > supplied HAL driver. > > > > The hal module is not needed for the DRI, generally. I don't completely > > understand how the DRI works with multihead Matrox. I think you're > > supposed to be able to do accelerated DRI on both heads with the mga_hal > > module with one of the driver options, but I have never tested it. > > how to add mga_hal module to XFree 4.3 ? > On the www.matrox.com I found driver only for linux and XFree 4.21 and below. > Is this binary library (.../4.2.1/drivers/src/HALlib/mgaHALlib.a) from Matrox > good for XFree 4.3 under FreeBSD 4.8S ?? > > PS: I have G400. > agp and mga kernel modules loaded without problem. > I have only one problem: > (EE) MGA: Failed to load module "mga_hal" (module does not exist, 0) > > Thanx for help. > > -- > Vladislav V. Zhuk (06267)3-60-03 [EMAIL PROTECTED] 2:465/[EMAIL PROTECTED] > _______________________________________________ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "[EMAIL PROTECTED]" > > > _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
