On Fri, 14 Mar 2003, at 14:57 [=GMT-0500], jason wrote: > freebsd heads.. > > I have an HP kayak machine (dual 300MHz processors) > Installed 4.7-Release and just updated with makeworld > > > FreeBSD beast 4.8-RC FreeBSD 4.8-RC #0: Fri Mar 14 13:19:17 EST 2003 > > [EMAIL PROTECTED]:/usr/obj/usr/src/sys/BEAST i386 > > from dmesg, I get: > > FreeBSD/SMP: Multiprocessor motherboard > > cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000 > > cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000 > > io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000 > > Preloaded elf kernel "kernel" at 0xc0525000. > > Preloaded userconfig_script "/boot/kernel.conf" at 0xc052509c. > > Pentium Pro MTRR support enabled > > but when I run top, I only see 1 cpu.. > > last pid: 14346; load averages: 1.09, 0.94, 0.53 up 0+00:24:31 > > 14:20:36 > > 37 processes: 2 running, 35 sleeping > > CPU states: 49.1% user, 0.0% nice, 7.6% system, 0.0% interrupt, 43.3% > > idle > > Mem: 12M Active, 32M Inact, 34M Wired, 16K Cache, 35M Buf, 169M Free > > Swap: 497M Total, 497M Free > > is this expected?
What is wrong with it? The CPU used on a particular process pops up in the stuff below what you quote: PID USERNAME PRI NICE SIZE RES STATE C TIME WCPU CPU COMMAND 1057 marc 99 20 924K 572K CPU1 1 232.6H 87.16% 87.16% dnetc 1058 marc 99 20 924K 572K RUN 0 232.7H 85.94% 85.94% dnetc 36413 root 2 0 1480K 972K sbwait 1 0:11 9.05% 9.03% ftpd 26331 root 2 0 992K 600K select 0 13:29 3.22% 3.22% pptp Look under "C". To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-stable" in the body of the message
