On Wed, 25 Sep 2002, Yanek Korff wrote: > > I'm working on a system with an Intel motherboard (SE7500CW2SCSI) - the one > that's being discussed in freebsd-smp right now due to SMP problems, panic > on boot when SMP is enabled. That's somewhat beside the point for now... > > What I'd really like to do is get the integrated SCSI controller working > with the sym drivers. LSI chipset listed as LSI Logic* 53C1000 on the Intel > website. Here's a piece of the dmesg: > > sym0: <1010-66> port 0x7000-0x70ff mem > 0xfc200000-0xfc201fff,0xfc202000-0xfc2023ff irq 11 at devic > e 1.0 on pci3 > sym0: Symbios NVRAM, ID 7, Fast-80, SE, parity checking > sym0: open drain IRQ line driver, using on-chip SRAM > sym0: using LOAD/STORE-based firmware. > sym0: handling phase mismatch from SCRIPTS. > CACHE TEST FAILED: script execution failed. > start=7c99f4fc, pc=7c99f4fc, end=7c99f51c > sym0: CACHE INCORRECTLY CONFIGURED. > device_probe_and_attach: sym0 attach returned 6 > > There are two onboard NICs on this box and a graphics card using irq11. > dmesg | grep "irq 11": > sym0: <1010-66> port 0x7000-0x70ff mem > 0xfc200000-0xfc201fff,0xfc202000-0xfc2023ff irq 11 at device 1.0 on pci3 > pci4: <ATI Mach64-GR graphics accelerator> at 3.0 irq 11 > fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x8400-0x843f mem > 0xfc300000-0xfc31ffff,0xfc341000-0xfc341fff irq 11 at device 4.0 on pci4 > fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0x8440-0x847f mem > 0xfc320000-0xfc33ffff,0xfc342000-0xfc342fff irq 11 at device 5.0 on pci4 > pci0: <unknown card> (vendor=0x8086, dev=0x2483) at 31.3 irq 11 > > > Also the PCI NIC isn't showing up -at all- It's likely also trying to use > irq11 (it's an XL -- ah... 3com905). > > Any idea what's going on here? Advice? Can I manually change the IRQs of > any of this stuff to get things going?
Can you manually assigning IRQs in the BIOS setup? -- Juha Saarinen To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-stable" in the body of the message
