Hi, after updating from a 4.4-STABLE (october last year) to 4.5-STABLE (2002-03-18) my HPT370 uses only UDMA66 by default. Nothing else has changed. The cable is specified for that speed and there is only one UDMA100 capable disk on each channel. UDMA100 worked w/o any problems with 4.4-STABLE.
with 4.4-STABLE: atapci1: <HighPoint HPT370 ATA100 controller> port 0xb000-0xb0ff,0xb400-0xb403,0xb800-0xb807,0xd000-0xd003,0xd400-0xd407 irq 11 at device 12.0 on pci0 ad4: 76319MB <MAXTOR 4K080H4> [155061/16/63] at ata2-master UDMA100 ad6: 76319MB <MAXTOR 4K080H4> [155061/16/63] at ata3-master UDMA100 with 4.5-STABLE: atapci1: <HighPoint HPT370 ATA100 controller> port 0xb000-0xb0ff,0xb400-0xb403,0xb800-0xb807,0xd000-0xd003,0xd400-0xd407 irq 11 at device 12.0 on pci0 ad4: 76319MB <MAXTOR 4K080H4> [155061/16/63] at ata2-master UDMA66 ad6: 76319MB <MAXTOR 4K080H4> [155061/16/63] at ata3-master UDMA66 Has anybody seen this before? Bye, Ronald -- * The whole problem with the world is that fools and fanatics are always * so certain of themselves, but wiser people so full of doubts. * --Bertrand Russell To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-stable" in the body of the message
