Hi, At 10:13 29/11/01 -0200, Luiz Gustavo (Berrão) wrote: >I'm still having problems with the realtek ethernet card. One of my friends >told me that the rl0 module doesn't work fine with other modules (like, if I >want two ethernet cards or both are rl0 or none is). Is it true?
Well, the following seems to work just fine here (on 4.3R): >Jul 24 08:43:49 goliath /kernel: fxp0: <Intel Pro 10/100B/100+ Ethernet> >port 0xd000-0xd03f mem 0xd6000000-0xd60fffff,0xd6202000-0xd6202fff irq 12 >at device 13.0 on pci0 >Jul 24 08:43:49 goliath /kernel: fxp0: Ethernet address 00:e0:81:02:8a:73 >Jul 24 08:43:49 goliath /kernel: fxp1: <Intel Pro 10/100B/100+ Ethernet> >port 0xd400-0xd43f mem 0xd6100000-0xd61fffff,0xd6201000-0xd6201fff irq 10 >at device 14.0 on pci0 >Jul 24 08:43:49 goliath /kernel: fxp1: Ethernet address 00:e0:81:02:8a:74 >Jul 24 08:43:49 goliath /kernel: rl0: <RealTek 8139 10/100BaseTX> port >0xe000-0xe0ff mem 0xd6203000-0xd62030ff irq 10 at device 16.0 on pci0 >Jul 24 08:43:49 goliath /kernel: rl0: Ethernet address: 00:50:bf:32:ca:e9 >Jul 24 08:43:49 goliath /kernel: miibus0: <MII bus> on rl0 >Jul 24 08:43:49 goliath /kernel: rlphy0: <RealTek internal media >interface> on miibus0 >Jul 24 08:43:49 goliath /kernel: rlphy0: 10baseT, 10baseT-FDX, 100baseTX, >100baseTX-FDX, auto >Jul 24 08:43:49 goliath /kernel: rl1: <RealTek 8139 10/100BaseTX> port >0xe400-0xe4ff mem 0xd6204000-0xd62040ff irq 11 at device 17.0 on pci0 >Jul 24 08:43:49 goliath /kernel: rl1: Ethernet address: 00:50:bf:32:ca:ee >Jul 24 08:43:49 goliath /kernel: miibus1: <MII bus> on rl1 >Jul 24 08:43:49 goliath /kernel: rlphy1: <RealTek internal media >interface> on miibus1 >Jul 24 08:43:49 goliath /kernel: rlphy1: 10baseT, 10baseT-FDX, 100baseTX, >100baseTX-FDX, auto -- Bob Bishop +44 (0)118 977 4017 [EMAIL PROTECTED] fax +44 (0)118 989 4254 To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-stable" in the body of the message