In local.freebsd.stable you write: >On Wed, 31 Oct 2001, Mikko Tyolajarvi wrote:
>> >acd0: CD-RW <LG CD-RW CED-8080B> at ata1-master using PIO4 >> >> Not that it is any help to you, but I have the same problem (data >> burns ok, audio does not) with an 8083B. And apparently we're not >> alone: <http://www.freebsd.org/cgi/query-pr.cgi?pr=27893>. >> >> My solution? I bought a Plextor. >If only that were an option in this case ;) >Is it a problem with burncd itself or with the ATA drivers? It is in the ATA kernel code, or rather (IMHO) the LG firmware not behaving according to spec. I took a quick look at what was going on, but without proper hardware documentation thara isn't much to do; the drive insists that a command is "illegal" and that's it... Hence the purchase of a better drive. >I don't think there are any alternatives, either... cdrecord and cdrdao >both support the LG CED-8080B, but, I know the former won't work since >there's not ATAPI passthrough and I believe the latter suffers the same >fate... Pretty much all other CD-RW programs have been written for SCSI, and use some kind of scsi-to-atapi conversion library or driver to work with atapi drives. Whether atapi actually just is scsi commands over a different transport or not I don't know, but FreeBSD for the time being does not have such a compatibility thingie. $.02, /Mikko -- Mikko Työläjä[EMAIL PROTECTED] RSA Security To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-stable" in the body of the message
