I have this same problem with my Vaio FX220. Attached is two verbose dmesgs
that I took over a serial cable, one of a kernel from last night's source
and one from my old kernel (source from maybe a month ago).
On Sun, 26 Aug 2001, Jim Mock wrote:
> Date: Sun, 26 Aug 2001 18:57:51 -0700
> From: Jim Mock <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Cc: [EMAIL PROTECTED]
> Subject: Booting hangs with 4.4-RC
>
> There appear to be some major issues with 4.4-RC booting on a Sony Vaio
> R505TE. 4.3-RELEASE boots fine, however after a cvsup and make world,
> it hangs at mounting the root fs. It just sits there forever doing
> nothing. I'm trying a snapshot from mid-July right now to see if it's
> Warner's changes or something else causing it. It's hard to tell at
> this point, because like I said, it does absolutely nothing but sit
> there.
>
> - jim
>
> --
> jim mock <[EMAIL PROTECTED]> tech writer | iXsystems, Inc.
> http://soupnazi.org/ work: [EMAIL PROTECTED] | [EMAIL PROTECTED]
>
> To Unsubscribe: send mail to [EMAIL PROTECTED]
> with "unsubscribe freebsd-mobile" in the body of the message
>
>
Console: serial port
BIOS drive A: is disk0
BIOS drive C: is disk1
BIOS 634kB/126912kB available memory
FreeBSD/i386 bootstrap loader, Revision 0.8
(joshe@sparky, Mon Jul 16 02:24:45 EDT 2001)
Loading /boot/defaults/loader.conf
/kernel text=0x1b8de0 data=0x3ca44+0x1db30 syms=[0x4+0x2fec0+0x4+0x35912]
/modules/agp.ko text=0x629c data=0x768+0x1c syms=[0x4+0x11d0+0x4+0x10d9]
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [kernel] in 9 seconds...
Type '?' for a list of commands, 'help' for more detailed help.
ok
ok boot -sv
boot -sv
SMAP type=01 base=00000000 00000000 len=00000000 0009e800
SMAP type=02 base=00000000 0009e800 len=00000000 00001800
SMAP type=02 base=00000000 000c0000 len=00000000 0000c000
SMAP type=02 base=00000000 000d8000 len=00000000 00028000
SMAP type=01 base=00000000 00100000 len=00000000 07bf0000
SMAP type=03 base=00000000 07cf0000 len=00000000 0000f000
SMAP type=04 base=00000000 07cff000 len=00000000 00001000
SMAP type=01 base=00000000 07d00000 len=00000000 00180000
SMAP type=02 base=00000000 07e80000 len=00000000 00100000
SMAP type=02 base=00000000 07f80000 len=00000000 00080000
SMAP type=02 base=00000000 ff800000 len=00000000 00400000
SMAP type=02 base=00000000 fff00000 len=00000000 00100000
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.4-RC #0: Sat Aug 25 18:29:00 EDT 2001
joshe@sparky:/usr/obj/usr/src/sys/SPARKY
Calibrating clock(s) ... TSC clock: 745264412 Hz, i8254 clock: 1193220 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium III/Pentium III Xeon/Celeron (745.24-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 132644864 (129536K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009dfff, 643072 bytes (157 pages)
0x003ab000 - 0x07ceffff, 127160320 bytes (31045 pages)
0x07d00000 - 0x07e77fff, 1540096 bytes (376 pages)
avail memory = 125362176 (122424K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f7170
bios32: Entry = 0xfd878 (c00fd878) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x150
pnpbios: Found PnP BIOS data at 0xc00f71a0
pnpbios: Entry = f0000:8f27 Rev = 1.0
Other BIOS signatures found:
ACPI: 000f7110
Preloaded elf kernel "kernel" at 0xc0385000.
Preloaded elf module "agp.ko" at 0xc03850a8.
VESA: information block
56 45 53 41 00 03 00 01 00 01 01 00 00 00 40 00
00 01 10 00 00 01 31 01 00 01 43 01 00 01 5d 01
00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
VESA: 16 mode(s) found
VESA: v3.0, 1024k memory, flags:0x1, mode table:0xc030fae0 (1000040)
VESA: Intel815M(TM) Graphics Chip Accelerated VGA BIOS
VESA: Intel Corporation i815M Graphics Controller Hardware Version 0.0
Pentium Pro MTRR support enabled
md0: Malloc disk
Creating DISK md0
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000fac0
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=11308086)
Using $PIR table, 9 entries at 0xc00fdf30
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x1130, revid=0x11
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x1132, revid=0x11
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 32, base f8000000, size 26
map[14]: type 1, range 32, base f4000000, size 19
found-> vendor=0x8086, dev=0x2448, revid=0x03
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x8086, dev=0x244c, revid=0x03
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x244a, revid=0x03
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 00001800, size 4
found-> vendor=0x8086, dev=0x2442, revid=0x03
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=9
map[20]: type 1, range 32, base 00001820, size 5
found-> vendor=0x8086, dev=0x2443, revid=0x03
class=0c-05-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=b, irq=9
map[20]: type 1, range 32, base 00001810, size 4
found-> vendor=0x8086, dev=0x2444, revid=0x03
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=c, irq=9
map[20]: type 1, range 32, base 00002400, size 5
found-> vendor=0x8086, dev=0x2445, revid=0x03
class=04-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=b, irq=9
map[10]: type 1, range 32, base 00001c00, size 8
map[14]: type 1, range 32, base 00001840, size 6
found-> vendor=0x8086, dev=0x2446, revid=0x03
class=07-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=b, irq=9
map[10]: type 1, range 32, base 00002000, size 8
map[14]: type 1, range 32, base 00001880, size 7
pci0: <PCI bus> on pcib0
agp0: <Intel 82815 (i815 GMCH) SVGA controller> mem
0xf4000000-0xf407ffff,0xf8000000-0xfbffffff irq 9 at device 2.0 on pci0
agp0: allocating GATT for aperture of size 64M
pcib1: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0
found-> vendor=0x104c, dev=0x8021, revid=0x02
class=0c-00-10, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=9
found-> vendor=0x1180, dev=0x0476, revid=0x80
class=06-07-00, hdrtype=0x02, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=0
found-> vendor=0x1180, dev=0x0476, revid=0x80
class=06-07-00, hdrtype=0x02, mfdev=1
subordinatebus=0 secondarybus=0
intpin=b, irq=0
found-> vendor=0x8086, dev=0x2449, revid=0x03
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 32, base f4100000, size 12
map[14]: type 1, range 32, base 00003000, size 6
pci1: <PCI bus> on pcib1
pci1: <unknown card> (vendor=0x104c, dev=0x8021) at 0.0 irq 9
pcic0: <Ricoh RL5C476 PCI-CardBus Bridge> irq 0 at device 2.0 on pci1
pcic0: PCI Memory allocated: 0x44000000
pccard0: <PC Card bus (classic)> on pcic0
pcic1: <Ricoh RL5C476 PCI-CardBus Bridge> irq 0 at device 2.1 on pci1
pcic1: PCI Memory allocated: 0x44001000
using shared irq0.
pccard1: <PC Card bus (classic)> on pcic1
fxp0: <Intel Pro/100 Ethernet> port 0x3000-0x303f mem 0xf4100000-0xf4100fff irq 9 at
device 8.0 on pci1
fxp0: using memory space register mapping
fxp0: Ethernet address 08:00:46:28:ed:48
fxp0: PCI IDs: 8086 2449 8086 3013 0003
fxp0: Chip Type: 0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: fxp0 attached
isab0: <PCI to ISA bridge (vendor=8086 device=244c)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port 0x1800-0x180f at device 31.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x1800
ata0: mask=03 status0=50 status1=00
ata0: mask=03 ostat0=50 ostat2=00
ata0-slave: ATAPI probe a=00 b=00
ata0-master: ATAPI probe a=00 b=00
ata0: mask=03 status0=50 status1=00
ata0-master: ATA probe a=01 b=a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x1808
ata1: mask=03 status0=50 status1=00
ata1: mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI probe a=14 b=eb
ata1-slave: ATAPI probe a=00 b=00
ata1: mask=03 status0=00 status1=00
ata1: devices=04
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0x1820-0x183f irq 9 at
device 31.2 on pci0
using shared irq9.
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x8086, dev=0x2443) at 31.3 irq 9
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0x2400-0x241f irq 9 at
device 31.4 on pci0
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pcm0: <Intel 82801BA (ICH2)> port 0x1840-0x187f,0x1c00-0x1cff irq 9 at device 31.5 on
pci0
pcm0: ac97 codec id 0x41445348 (Analog Devices AD1881A)
pcm0: ac97 codec features headphone, 6 bit master volume, Analog Devices Phat Stereo
pcm0: ac97 primary codec extended features variable rate PCM
pcm: setmap 16000, 4000; 0xcc49b000 -> 16000
pcm: setmap 21000, 4000; 0xcc49f000 -> 21000
pcm: setmap 25000, 4000; 0xcc4a3000 -> 25000
pci0: <unknown card> (vendor=0x8086, dev=0x2446) at 31.6 irq 9
eisa0: <EISA bus> on motherboard
eisa0: unknown card @H@0000 (0x01000000) at slot 1
pcic-: pcic0 exists, using next available unit number
pcic-: pcic1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xd8000-0xdbfff,0xdc000-0xdffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000
psm0: current command byte:0047
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 00 00 64
psm: status 00 03 64
psm: status 00 03 64
psm: data 08 00 00
psm: status 73 02 0a
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 50 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/15 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pcic2 failed to probe at port 0x3e0-0x3e1 on isa0
pcic3 failed to probe at port 0x3e0-0x3e1 on isa0
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
device combination doesn't support shared irq0
intr_connect(irq0) failed, result=-1
bpf: lo0 attached
ata0-master: success setting UDMA4 on Intel chip
Creating DISK ad0
ad0: <IBM-DJSA-220/JSKOAC3A> ATA-5 disk at ata0-master
ad0: 14307MB (29302560 sectors), 29070 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA66
ad0: piomode=4 dmamode=2 udmamode=4 cblid=1
ad0: 14307MB <IBM-DJSA-220> [29070/16/63] at ata0-master UDMA66
ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: <QSI DVD-ROM SDR-081/EST9> DVD-ROM drive at ata1 as master
acd0: read 4125KB/s (4125KB/s), 512KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, packet
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
Mounting root from ufs:/dev/ad0s1a
ad0s1: type 0xa5, start 63, end = 7325639, size 7325577 : OK
ad0s2: type 0xa5, start 7325640, end = 29302559, size 21976920 : OK
start_init: trying /sbin/init
Enter full pathname of shell or RETURN for /bin/sh:
Console: serial port
BIOS drive A: is disk0
BIOS drive C: is disk1
BIOS 634kB/126912kB available memory
FreeBSD/i386 bootstrap loader, Revision 0.8
(joshe@sparky, Mon Jul 16 02:24:45 EDT 2001)
Loading /boot/defaults/loader.conf
/kernel text=0x1b8de0 data=0x3ca44+0x1db30 syms=[0x4+0x2fec0+0x4+0x35912]
/modules/agp.ko text=0x629c data=0x768+0x1c syms=[0x4+0x11d0+0x4+0x10d9]
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [kernel] in 9 seconds...
Type '?' for a list of commands, 'help' for more detailed help.
ok
ok unload
unload
ok load kernel.good
load kernel.good
/kernel.good text=0x1b3a6c data=0x48220+0x1d5f8 syms=[0x4+0x2efa0+0x4+0x34604]
ok boot -sv
boot -sv
SMAP type=01 base=00000000 00000000 len=00000000 0009e800
SMAP type=02 base=00000000 0009e800 len=00000000 00001800
SMAP type=02 base=00000000 000c0000 len=00000000 0000c000
SMAP type=02 base=00000000 000d8000 len=00000000 00028000
SMAP type=01 base=00000000 00100000 len=00000000 07bf0000
SMAP type=03 base=00000000 07cf0000 len=00000000 0000f000
SMAP type=04 base=00000000 07cff000 len=00000000 00001000
SMAP type=01 base=00000000 07d00000 len=00000000 00180000
SMAP type=02 base=00000000 07e80000 len=00000000 00100000
SMAP type=02 base=00000000 07f80000 len=00000000 00080000
SMAP type=02 base=00000000 ff800000 len=00000000 00400000
SMAP type=02 base=00000000 fff00000 len=00000000 00100000
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-STABLE #4: Wed Aug 8 21:56:33 EDT 2001
joshe@sparky:/usr/src/sys/compile/SPARKY
Calibrating clock(s) ... TSC clock: 745260293 Hz, i8254 clock: 1193213 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium III/Pentium III Xeon/Celeron (745.24-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 132644864 (129536K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009dfff, 643072 bytes (157 pages)
0x003a5000 - 0x07ceffff, 127184896 bytes (31051 pages)
0x07d00000 - 0x07e77fff, 1540096 bytes (376 pages)
avail memory = 125386752 (122448K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f7170
bios32: Entry = 0xfd878 (c00fd878) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x150
pnpbios: Found PnP BIOS data at 0xc00f71a0
pnpbios: Entry = f0000:8f27 Rev = 1.0
Other BIOS signatures found:
ACPI: 000f7110
Preloaded elf kernel "kernel.good" at 0xc037f000.
VESA: information block
56 45 53 41 00 03 00 01 00 01 01 00 00 00 40 00
00 01 10 00 00 01 31 01 00 01 43 01 00 01 5d 01
00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
VESA: 16 mode(s) found
VESA: v3.0, 1024k memory, flags:0x1, mode table:0xc0315a60 (1000040)
VESA: Intel815M(TM) Graphics Chip Accelerated VGA BIOS
VESA: Intel Corporation i815M Graphics Controller Hardware Version 0.0
Pentium Pro MTRR support enabled
md0: Malloc disk
Creating DISK md0
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000fac0
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=11308086)
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000fac0
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=11308086)
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x1130, revid=0x11
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x1132, revid=0x11
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 32, base f8000000, size 26
map[14]: type 1, range 32, base f4000000, size 19
found-> vendor=0x8086, dev=0x2448, revid=0x03
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x8086, dev=0x244c, revid=0x03
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x244a, revid=0x03
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 00001800, size 4
found-> vendor=0x8086, dev=0x2442, revid=0x03
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=9
map[20]: type 1, range 32, base 00001820, size 5
found-> vendor=0x8086, dev=0x2443, revid=0x03
class=0c-05-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=b, irq=9
map[20]: type 1, range 32, base 00001810, size 4
found-> vendor=0x8086, dev=0x2444, revid=0x03
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=c, irq=9
map[20]: type 1, range 32, base 00002400, size 5
found-> vendor=0x8086, dev=0x2445, revid=0x03
class=04-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=b, irq=9
map[10]: type 1, range 32, base 00001c00, size 8
map[14]: type 1, range 32, base 00001840, size 6
found-> vendor=0x8086, dev=0x2446, revid=0x03
class=07-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=b, irq=9
map[10]: type 1, range 32, base 00002000, size 8
map[14]: type 1, range 32, base 00001880, size 7
pci0: <PCI bus> on pcib0
pci0: <Intel model 1132 VGA-compatible display device> (vendor=0x8086, dev=0x1132) at
2.0 irq 9
pcib1: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0
found-> vendor=0x104c, dev=0x8021, revid=0x02
class=0c-00-10, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=9
found-> vendor=0x1180, dev=0x0476, revid=0x80
class=06-07-00, hdrtype=0x02, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=0
found-> vendor=0x1180, dev=0x0476, revid=0x80
class=06-07-00, hdrtype=0x02, mfdev=1
subordinatebus=0 secondarybus=0
intpin=b, irq=0
found-> vendor=0x8086, dev=0x2449, revid=0x03
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 32, base f4100000, size 12
map[14]: type 1, range 32, base 00003000, size 6
pci1: <PCI bus> on pcib1
pci1: <unknown card> (vendor=0x104c, dev=0x8021) at 0.0 irq 9
pcic-pci0: <Ricoh RL5C476 PCI-CardBus Bridge> irq 0 at device 2.0 on pci1
pcic-pci0: Legacy address set to 0x3e0
PCI Config space:
00: 04761180 02100007 06070080 00820000
10: 00000000 020000dc 00000000 00000000
20: 00000000 00000000 00000000 00000000
30: 00000000 00000000 00000000 07800100
40: 80df104d 000003e1 00000000 00000000
50: 00000000 00000000 00000000 00000000
60: 00000000 00000000 00000000 00000000
70: 00000000 00000000 00000000 00000000
80: 00a20001 00000000 04630463 30000000
90: 00000000 00000000 00000000 00000000
Cardbus Socket registers:
00: f000ff53: f000ff53: f000e2c3: f000ff53:
10: f000ff53: f000ff54: f000a2d5: f000ff53:
ExCa registers:
00: eb 88 d5 43 30 d2 66 f7 f3 88 d7 5a 66 3d ff 03
10: 00 00 fb 77 44 86 c4 c0 c8 02 08 e8 40 91 88 fe
20: 28 e0 8a 66 02 38 e0 72 02 88 e0 bf 05 00 c4 5e
30: 04 50 b4 02 cd 13 5b 73 0a 4f 74 1c 30 e4 cd 13
pcic-pci1: <Ricoh RL5C476 PCI-CardBus Bridge> irq 0 at device 2.1 on pci1
PCI Config space:
00: 04761180 02100007 06070080 00820000
10: 00000000 020000dc 00000000 00000000
20: 00000000 00000000 00000000 00000000
30: 00000000 00000000 00000000 07800200
40: 80df104d 000003e1 00000000 00000000
50: 00000000 00000000 00000000 00000000
60: 00000000 00000000 00000000 00000000
70: 00000000 00000000 00000000 00000000
80: 00a20001 00000000 04630463 30000000
90: 00000000 00000000 00000000 00000000
Cardbus Socket registers:
00: f000ff53: f000ff53: f000e2c3: f000ff53:
10: f000ff53: f000ff54: f000a2d5: f000ff53:
ExCa registers:
00: eb 88 d5 43 30 d2 66 f7 f3 88 d7 5a 66 3d ff 03
10: 00 00 fb 77 44 86 c4 c0 c8 02 08 e8 40 91 88 fe
20: 28 e0 8a 66 02 38 e0 72 02 88 e0 bf 05 00 c4 5e
30: 04 50 b4 02 cd 13 5b 73 0a 4f 74 1c 30 e4 cd 13
fxp0: <Intel Pro/100 Ethernet> port 0x3000-0x303f mem 0xf4100000-0xf4100fff irq 9 at
device 8.0 on pci1
fxp0: using memory space register mapping
fxp0: Ethernet address 08:00:46:28:ed:48
fxp0: PCI IDs: 8086 2449 8086 3013 0003
fxp0: Chip Type: 0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: fxp0 attached
isab0: <PCI to ISA bridge (vendor=8086 device=244c)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port 0x1800-0x180f at device 31.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x1800
ata0: mask=03 status0=50 status1=00
ata0: mask=03 ostat0=50 ostat2=00
ata0-slave: ATAPI probe a=00 b=00
ata0-master: ATAPI probe a=00 b=00
ata0: mask=03 status0=50 status1=00
ata0-master: ATA probe a=01 b=a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x1808
ata1: mask=03 status0=50 status1=00
ata1: mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI probe a=14 b=eb
ata1-slave: ATAPI probe a=00 b=00
ata1: mask=03 status0=00 status1=00
ata1: devices=04
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0x1820-0x183f irq 9 at
device 31.2 on pci0
using shared irq9.
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x8086, dev=0x2443) at 31.3 irq 9
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0x2400-0x241f irq 9 at
device 31.4 on pci0
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pcm0: <Intel 82801BA AC'97 audio> port 0x1840-0x187f,0x1c00-0x1cff irq 9 at device
31.5 on pci0
pcm0: ac97 codec id 0x41445348
pcm0: ac97 codec features headphone, 6 bit master volume, Analog Devices Phat Stereo
pcm0: ac97 primary codec extended features variable rate PCM
pcm0: set VRA function
pcm: setmap 4000, 10000; 0xc8409000 -> 4000
pcm0: setmap(0x21000, 0x100)
pcm0: Play codec support rate(Hz): 48000 44100 22050 16000 11025 8000
pcm: setmap 31000, 10000; 0xc8429000 -> 31000
pcm0: setmap(0x41000, 0x100)
pcm0: Record codec support rate(Hz): 48000
pci0: <unknown card> (vendor=0x8086, dev=0x2446) at 31.6 irq 9
eisa0: <EISA bus> on motherboard
eisa0: unknown card C@C0000 (0x0c030000) at slot 1
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xd8000-0xdbfff,0xdc000-0xdffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000
psm0: current command byte:0047
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 00 00 64
psm: status 00 03 64
psm: status 00 03 64
psm: data 08 00 00
psm: status 73 02 0a
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 50 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/15 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pcic0: <Intel i82365SL-A/B> at port 0x3e0-0x3e1 on isa0
pcic0: Polling mode
pccard0: <PC Card bus (classic)> on pcic0
pccard1: <PC Card bus (classic)> on pcic0
stat is 33
stat is 33
pcic1: Cannot get I/O range
pcic1 failed to probe at port 0x3e0-0x3e1 on isa0
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: gif0 attached
bpf: lo0 attached
ata0-master: success setting UDMA4 on Intel chip
Creating DISK ad0
ad0: <IBM-DJSA-220/JSKOAC3A> ATA-5 disk at ata0-master
ad0: 14307MB (29302560 sectors), 29070 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA66
ad0: piomode=4 dmamode=2 udmamode=4 cblid=1
ad0: 14307MB <IBM-DJSA-220> [29070/16/63] at ata0-master UDMA66
ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: <QSI DVD-ROM SDR-081/EST9> DVD-ROM drive at ata1 as master
acd0: read 4125KB/s (4125KB/s), 512KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, packet
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
Mounting root from ufs:/dev/ad0s1a
ad0s1: type 0xa5, start 63, end = 7325639, size 7325577 : OK
ad0s2: type 0xa5, start 7325640, end = 29302559, size 21976920 : OK
start_init: trying /sbin/init
Enter full pathname of shell or RETURN for /bin/sh:
# swapon -a
swapon -a
swapon: adding /dev/ad0s1b as swap device
# fsck -p
fsck -p
/dev/ad0s1a: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1a: clean, 27881 free (689 frags, 3399 blocks, 0.7% fragmentation)
/dev/ad0s1f: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1f: clean, 741422 free (31374 frags, 88756 blocks, 1.0% fragmentation)
/dev/ad0s1e: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1e: clean, 12369 free (233 frags, 1517 blocks, 1.2% fragmentation)
# mount -a
mount -a
# mount
mount
/dev/ad0s1a on / (ufs, local, soft-updates)
/dev/ad0s1f on /usr (ufs, local, soft-updates)
/dev/ad0s1e on /var (ufs, local, soft-updates)
procfs on /proc (procfs, local)
# rm /boot.config
rm /boot.config
# reboot
reboot
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped
syncing disks... 3 3
done
Uptime: 1m6s
Rebooting...
