I had the exact same problem when I had 'SCSI Bios' enabled on my Adaptec 2940.
Turned it off and that stopped. Not sure what the problem is, but I know that is
the solution for me :)
Marc
On Tue, 1 May 2001, Gordon Tetlow wrote:
> I have an N440BX motherboard that, when using console redirection (so the
> BIOS messages and such come over the serial port), displays the following:
>
> BTX loader 1.00 BTX version is 1.01
> Console: internal video/keyboard
> BIOS drive A: is disk0
> BIOS drive C: is disk1
> BIOS 635kB/523200kB available memory
>
> FreeBSD/i386 bootstrap loader, Revision 0.8
> ([EMAIL PROTECTED], Wed Oct 4 15:01:32 PDT 2000)
> Loading /boot/defaults/loader.conf
>
> int=0000000d err=00000000 efl=00010216 eip=00005a6c
> eax=ff08428b ebx=0000760c ecx=ffffffff edx=00030160
> esi=00037788 edi=00093468 ebp=00093258 esp=00093258
> cs=002b ds=0033 es=0033 fs=0033 gs=0033 ss=0033
> cs:eip=89 11 83 40 08 04 c9 c3-55 89 e5 8b 45 08 8b 48
> ss:esp=98 32 09 00 d8 91 00 00-8b 42 08 ff 60 01 03 00
> BTX halted
>
> I was wondering if anyone else has seen this. The problem seems somewhat
> intermittent. It doesn't *always* happen but it often does. If I hit the
> reset switch, it seems to boot reliably from there.
>
> This system (actually systems. It's more than one so I know it's not
> hardware) booted perfectly until I enabled the console redirection.
> Nothing on the box has changed other than that.
>
> Any ideas? I'm stumped.
>
> -gordon
>
>
> To Unsubscribe: send mail to [EMAIL PROTECTED]
> with "unsubscribe freebsd-stable" in the body of the message
>
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-stable" in the body of the message
