After upgrading to 4.3 from 4.2 my vinum configuration seems
to have stopped working.
this is my vinum.conf file:
drive vinumdrive0 device /dev/ad2c
drive vinumdrive1 device /dev/ad3c
volume vimum0
plex name vinum0.p0 org concat
sd name vinum0.p0.s0 drive vinumdrive0 size 0
sd name vinum0.p0.s1 drive vinumdrive1 size 0
After trying numerous times to read the drives:
# vinum read /dev/ad2c /dev/ad3c
Apr 23 13:41:07 slumber /kernel: vinum: no drives found
I've even got as far as to redo the configurtion:
vinum create -f /etc/vinum.conf
but i get:
1: drive vinumdrive0 device /dev/ad2c
** 1 Can't initialize drive vinumdrive0: Inappropriate ioctl for device
2: drive vinumdrive1 device /dev/ad3c
** 2 Can't initialize drive vinumdrive1: Inappropriate ioctl for device
Both drives are there and seem fine, only other odd behavior is..
su-2.03# disklabel /dev/ad3c
# /dev/ad3c:
type: ESDI
disk: ad3s1
label:
flags:
bytes/sector: 512
sectors/track: 63
tracks/cylinder: 16
sectors/cylinder: 1008
cylinders: 59597
sectors/unit: 60074721
rpm: 3600
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0 # milliseconds
track-to-track seek: 0 # milliseconds
drivedata: 0
8 partitions:
# size offset fstype [fsize bsize bps/cpg]
c: 60074721 0 vinum # (Cyl. 0 - 59597*)
Warning, partition c is not marked as unused!
Warning, An incorrect partition c may cause problems for standard system utilities
This error message appears on both drives. I dont recall seeing this msg before when
I setup vinum, but I also dont think its a bad drive when both started doing it at
the same time.
Am i doing something wrong? I've had this working fine for about a year now and never
had
problems upgrading, this 4.3 release seems to have broke it but I cant say I know why.
I apologize if there is not enough information, i'll be glad to include any additional
information needed. Thanks.
--
Shawn Ostapuk
Senior UNIX System Administrator
Inficad Communications
PGP signature
