|
Hi,
I have tested a few more times by rebooting my box
and pinging a known good host.
Every time I see the same pattern. it works for a
few minutes, then stops working completely.
Attached is a text file with various system
information.
thanks,
Luc Morin
|
uname -a ouput:
FreeBSD southpark.videotron.ca 4.2-STABLE FreeBSD 4.2-STABLE #0: Thu Jan 18 18:00:27
EST 2001 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/MYKERN4 i386
dmesg output
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.2-STABLE #0: Thu Jan 18 18:00:27 EST 2001
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/MYKERN4
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (501.14-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x673 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 134201344 (131056K bytes)
Invalid command or syntax. Type `?' for help.
avail memory = 127844352 (124848K bytes)
Preloaded elf kernel "kernel" at 0xc02d7000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc02d709c.
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Rage128-RF graphics accelerator> at 0.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xb800-0xb80f at device 4.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 4.2 irq 5
chip1: <Intel 82371AB Power management controller> port 0xe800-0xe80f at device 4.3 on
pci0
pcm0: <AudioPCI ES1370> port 0xb000-0xb03f irq 10 at device 10.0 on pci0
ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xa800-0xa81f irq 5 at device 13.0 on
pci0
ed0: address 00:e0:29:40:c0:4f, type NE2000 (16 bit)
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: IEEE1284 device found /NIBBLE/ECP
Probing for PnP devices on ppbus0:
ppbus0: <Hewlett-Packard HP LaserJet 1100.1.0> PRINTER MLC,PCL,PJL
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
IP Filter: v3.4.8 initialized. Default = pass all, Logging = disabled
ata0-master: DMA limited to UDMA33, non-ATA66 compliant cable
ad0: 13216MB <QUANTUM FIREBALLP KA13.6> [26853/16/63] at ata0-master UDMA33
ata1-master: DMA limited to UDMA33, non-ATA66 compliant cable
ad2: 8063MB <QUANTUM FIREBALL CR8.4A> [16383/16/63] at ata1-master UDMA33
ad3: 3079MB <QUANTUM FIREBALL ST3.2A> [6256/16/63] at ata1-slave UDMA33
acd0: CDROM <CD-ROM CDU4011> at ata0-slave using PIO4
Mounting root from ufs:/dev/ad0s2a
ifconfig -a output:
ed0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 24.200.211.9 netmask 0xffffff00 broadcast 255.255.255.255
ether 00:e0:29:40:c0:4f
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
cat /usr/src/sys/i386/conf/MYKERN4 ouput:
machine i386
cpu I686_CPU
ident MYKERN4
maxusers 10
options INET #InterNETworking
options IPFILTER
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options UCONSOLE #Allow users to grab the console
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options USER_LDT
options P1003_1B #Posix P1003_1B real-time extentions
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM #Rate limit bad replies
device isa
device pci
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
options ATA_STATIC_ID #Static device numbering
options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1
device psm0 at atkbdc? irq 12
device vga0 at isa?
# splash screen/screen saver
pseudo-device splash
# syscons is the default console driver, resembling an SCO console
device sc0 at isa?
# Floating point support - do not disable.
device npx0 at nexus? port IO_NPX irq 13
# Power management support (see LINT for more options)
device apm0 at nexus? disable flags 0x20 # Advanced Power Management
# Serial (COM) ports
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio1 at isa? port IO_COM2 irq 3
# Parallel port
device ppc0 at isa? irq 7
device ppbus # Parallel port bus (required)
device lpt # Printer
# PCI Ethernet NICs.
device ed0
# Pseudo devices - the number indicates how many units to allocated.
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
pseudo-device tun # Packet tunnel.
pseudo-device pty # Pseudo-ttys (telnet etc)
# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device bpf #Berkeley packet filter
options TCP_DROP_SYNFIN #drop TCP packets with SYN+FIN
options TCP_RESTRICT_RST #restrict emission of TCP RST
#Sound
device pcm
PID TT STAT TIME COMMAND
0 ?? DLs 0:00.00 (swapper)
1 ?? ILs 0:00.01 /sbin/init --
2 ?? DL 0:00.00 (pagedaemon)
3 ?? DL 0:00.00 (vmdaemon)
4 ?? DL 0:00.00 (bufdaemon)
5 ?? DL 0:00.00 (syncer)
40 ?? Is 0:00.00 adjkerntz -i
115 ?? Is 0:00.00 /sbin/dhclient ed0
139 ?? Ss 0:00.03 syslogd -s
158 ?? Is 0:00.00 cron
227 v0 Ss 0:00.06 -bash (bash)
248 v0 R+ 0:00.00 ps -ax
228 v1 Is+ 0:00.00 /usr/libexec/getty Pc ttyv1
229 v2 Is+ 0:00.00 /usr/libexec/getty Pc ttyv2
230 v3 Is+ 0:00.01 /usr/libexec/getty Pc ttyv3
231 v4 Is+ 0:00.00 /usr/libexec/getty Pc ttyv4
232 v5 Is+ 0:00.00 /usr/libexec/getty Pc ttyv5
233 v6 Is+ 0:00.00 /usr/libexec/getty Pc ttyv6
234 v7 Is+ 0:00.00 /usr/libexec/getty Pc ttyv7
