hi i have had the same problem, also on a dell lattitude (CPt 333). 4.1.1-release installed and booted fine, liked my wavelan card. updating to stable using the reccomended procedure, which has worked on my other boxen (around oct 6 iirc), yielded a system with otherwise works fine but hangs hard on card insertion with no errors printed or logged. jeff On Tue, Oct 24, 2000 at 06:12:10AM -0700, David Meissner wrote: > I'm having a problem building a kernel after using cvs to upgrade to > 4.1-STABLE. The problem seems related to the pccard drivers. Computer is > a new Dell Latitude notebook. After reinstalling a couple of times, here > is the sequence I used for troubleshooting: > > Install 4.1-RELEASE from CD. > Copy GENERIC to NEWKERNEL, no changes. > Build and install NEWKERNEL - kernel boots fine, 3c589D NIC works with > no problems. > > So far this is to establish that I can build a working kernel. > > Use cvsup to track 4.1-STABLE. > Make world - no problems. > Run mergemaster, MAKEDEV - no problems. > Reboot with GENERIC kernel - no problems. > > Copy GENERIC to NEWKERNEL, no changes > Build and install NEWKERNEL - system hangs while booting. No error > messages, nothing in logs. > Comment out pccard drivers, rebuild NEWKERNEL. > Kernel boots fine. > > I would appreciate any suggestions for further troubleshooting. Thanks > in advance. > > David Meissner > > > To Unsubscribe: send mail to [EMAIL PROTECTED] > with "unsubscribe freebsd-stable" in the body of the message To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-stable" in the body of the message
