[ On Tuesday, October 3, Thomas David Rivers wrote: ]
> Just to add to this thread a little.
>
> I put the card in a 3.4-RELEASE machine (which works.) It seems to
> acquire a different MAC address than the 4.1.1 code does.
>
> In 3.4 PAO I get:
>
> Card inserted, slot 0
> card0: assign ed0 iobase 0x300 irq 9 flags 0x30000
> ed0: address 00:10:60:38:3b:b7, type NE2000 (16 bit)
>
> I 4.1(.1) I get:
>
> ed1 at port 0x300-0x31f ir1 3 slot 1 on pccard1
> ed1: address 01:02:00:ff:15:1d, type NE2000 (16 bit)
>
When you do this in 4.1.1, do you already have an 'ed0' device in your
machine? The PAO example shows 'ed0' as the device while 4.1.1 shows ed1. I'm
currently having problems with any 4.1.1 kernel probing my two ed cards
incorrectly (I get ed1 but not ed0), I just haven't had time to debug
it. Hopefully tonight I can back out the if_ed.c file to the last RELENG_4
commit and see if that fixes my problem.
Just wondering if there was another card in your machine which would make this
PCcard NE2000 become ed1 rather than ed0.
-Jr
--
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
| John Reynolds WCCG, CCE, Higher Levels of Abstraction |
| Intel Corporation MS: CH6-210 Phone: 480-554-9092 pgr: 602-868-6512 |
| [EMAIL PROTECTED] http://www-aec.ch.intel.com/~jreynold/ |
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-stable" in the body of the message
