On Mon, Sep 25, 2000 at 09:47:24AM -0700, Gary Kline wrote:
> On Mon, Sep 25, 2000 at 09:18:38AM +0200, Roman Shterenzon wrote:
> > Quoting Gary Kline <[EMAIL PROTECTED]>:
> >
> > > According to Daniel O'Connor:
> > >
> > > >
> > > > On 25-Sep-00 Gary Kline wrote:
> > > > > ppi0: <Parallel I/O> on ppbus0
> > > > > sbc0: <Soundblaster 16> at port 0x220-0x22f irq 5 drq 1 flags 0x15
> > > on isa0
> > > > > sbc0: alloc_resource
> > > > > device_probe_and_attach: sbc0 attach returned 6
> > > > >
> > > > >
> > > > > I don't know what the last line means. I just remade snd0...
> > > >
> > > > The last line means its busted :)
> > > >
> > > > Are you sure you have 'device pcm' in your kernel config _as well_ as
> > > sbc0?
> > > >
> > >
> > >
> > > device pcm
> > > device sbc0 at isa? port 0x220 irq 5 drq 1 flags 0x15
> > >
> > >
> > > Should this be pcm0, perhaps?
> > I've exactly the same hardware and had this problem because of irq conflict.
> > The sb is ISA and BIOS assigned IRQ to USB for some unclear reason.
> > I then set IRQ5 to be assigned to Legacy ISA in BIOS and it worked again.
> > The BIOS behavior was quite weird since it worked before.
> > Check if any other devices use irq5.
> > Hope that it helps.
> >
> >
> It may well help. This m'board is 2+ years old and we probably have
> dissimilar BIOS setups; I'll see if there is a way to associate
> irq5 with ISA. ...There is something bizarre going on because
> in switching my ``muuz'' display panels around there is a
> several second delay. This is brand new. With 3.X, no problems;
> with 4.1, there are these weird issues.
>
> --For the time being, I've gone back to the older obsolete
> snd stuff. Haven't tried it again, tho. Tonight...
>
> thanks for your input.
>
> gary
I finally got a Sound Blaster 16 non-PnP model working. Both pcm and sbc
had to be in the old ISA:
pcm0 at isa? ...
sbc0 at isa? ...
...format. After remaking sbc0, it seemed to work fine.
On my machine, IRQ 5 was used up by the parallel port, and IRQ 7 was used
for something else (can't remember). IRQ 9 seemed to work just fine.
I've also noticed the sound card will somehow pick up whatever IRQ you assign
in the kernel config. I've changed IRQs for the card from 7 to 9 without
changing any jumpers. (Actually, there are no jumpers for IRQ on my SB16).
As a side note, has anyone played withthe Gigabyte GA-7ZX onboard sound?
I'm getting one soon, and it's a standard SB 128 chipset (I normally
wouldn't get onboard sound, but this one actually seems decent).
--
David Edmondson <[EMAIL PROTECTED]> www.jlc.net/david
GFA dpu s+: a17>? C++$ UB++++$ P+>+++ L- E--- W++>+++ N-(+) o- K-> w O? M-(--)
V?>-- PS+ PE Y? PGP->+ t- 5 X(+) R tv>! b+>++ DI+++ D(+) G(--) e>* h!>+ r++ y?
=FreeBSD - The Best NT Upgrade=
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-stable" in the body of the message
