Am 22.01.2021 um 22:38 schrieb Stefan Bethke <s...@lassitu.de>: > > Am 22.01.2021 um 22:10 schrieb Stefan Bethke <s...@lassitu.de>: >> >> I have a weird situation with an PCEngines APU3, where I can't seem to be >> able to transmit packets through either of the igb interfaces. With tcpdump, >> I can see packets arriving, and the interface flags appear to be just fine: >> >> options=e527bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6> >> ether 00:0d:b9:58:xx:xx >> inet6 fe80::20d:b9ff:xxxx:xxxx%igb0 prefixlen 64 scopeid 0x1 >> inet6 2a02:8108:4840:xxxx:xxxx:xxxx:xxxx:xxxx prefixlen 64 autoconf >> inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255 >> media: Ethernet autoselect (1000baseT <full-duplex>) >> status: active >> nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL> >> >> dhclient is running on that interfaces, and I got an IPv6 address through RA. >> >> Assigning an address manually doesn't change anything. >> >> igb0@pci0:1:0:0: class=0x020000 card=0x00008086 chip=0x157b8086 >> rev=0x03 hdr=0x00 >> vendor = 'Intel Corporation' >> device = 'I210 Gigabit Network Connection' >> class = network >> subclass = ethernet >> >> # freebsd-version >> 12.2-RELEASE >> >> I installed 12.2-REL a couple of weeks ago, and haven't done anything since. >> >> Tried the three different port with different cables on different switch >> ports, which are working fine with other machines. >> >> I'm installing updates now via a USB adapter. > > Updating the firmware to apu2_v4.11.0.6.rom didn't change a thing. Somebody > suggested turning off LRO, but that didn't help either. > > I have another APU2 with 12.1 that is doing just fine. I guess I can > downgrade and see if that changes anything.
Debian is not happy about the interfaces either, so I'm guessing its a hardware problem. Stefan -- Stefan Bethke <s...@lassitu.de> Fon +49 151 14070811
signature.asc
Description: Message signed with OpenPGP
