Hi Hans,
can you shed some light/help?
thanks,
danny
> On 2 Jan 2020, at 11:11, Daniel Braniss <da...@cs.huji.ac.il> wrote:
>
> Hi,
> after connecting this QR reader I see a new /dev/ttyU but as soon as I try
> tip,
> the device disconnects. (BTW, it’s configured as a ‘Virtual Serial Port’)
>
> dmsg:
> …
> Jan 2 10:54:57 pampero kernel: umodem0 on uhub1
> Jan 2 10:54:57 pampero kernel: umodem0: <SM SM-2D PRODUCT USB UART, class
> 2/0, rev 1.10/1.00, addr 38> on usbus0
> Jan 2 10:54:57 pampero kernel: umodem0: data interface 1, has no CM over
> data, has no break
> Jan 2 10:56:01 pampero kernel: umodem0: at uhub1, port 2, addr 38
> (disconnected)
> Jan 2 10:56:02 pampero kernel: umodem0:
> Jan 2 10:56:02 pampero kernel: detached
> Jan 2 10:56:03 pampero kernel: umodem0 on uhub1
> Jan 2 10:56:03 pampero kernel: umodem0: <SM SM-2D PRODUCT USB UART, class
> 2/0, rev 1.10/1.00, addr 38> on usbus0
> Jan 2 10:56:03 pampero kernel: umodem0: data interface 1, has no CM over
> data, has no break
> …
>
> and usbconfig:
> pampero# usbconfig
> ugen0.1: <0x8086 XHCI root HUB> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps)
> pwr=SAVE (0mA)
> ugen0.2: <GenesysLogic USB2.0 Hub> at usbus0, cfg=0 md=HOST spd=HIGH
> (480Mbps) pwr=SAVE (500mA)
> ugen0.4: <Logitech USB Receiver> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps)
> pwr=ON (98mA)
> ugen0.5: <Prolific Technology Inc. USB-Serial Controller> at usbus0, cfg=0
> md=HOST spd=FULL (12Mbps) pwr=ON (100mA)
> ugen0.6: <GenesysLogic USB3.0 Hub> at usbus0, cfg=0 md=HOST spd=SUPER
> (5.0Gbps) pwr=SAVE (0mA)
> ugen0.3: <Silicon Labs CP2102 USB to UART Bridge Controller> at usbus0, cfg=0
> md=HOST spd=FULL (12Mbps) pwr=ON (100mA)
> ugen0.7: <SM SM-2D PRODUCT USB UART> at usbus0, cfg=0 md=HOST spd=FULL
> (12Mbps) pwr=ON (100mA) <— this is the QR
>
> any ideas?
>
> thanks,
> danny
>
> _______________________________________________
> freebsd-stable@freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
_______________________________________________
freebsd-stable@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
