Hi everyone, I recently took delivery of a Supermicro X11SRM-F with a Broadcom MegaRAID 9361-8i SAS 8 port card which has 4 Intel D3-S4610 960 GB SSDs and 4 Hitachi/WD Ultrastar HC300 4TB drives each in a RAID5.
I have /usr/local/etc/smartd.conf with just 'DEVICESCAN' and when smartd starts I see.. Nov 21 01:17:49 maarsy-acq3 smartd[2103]: Opened configuration file /usr/local/etc/smartd.conf Nov 21 01:17:49 maarsy-acq3 smartd[2103]: Drive: DEVICESCAN, implied '-a' Directive on line 23 of file /usr/local/etc/smartd.conf Nov 21 01:17:49 maarsy-acq3 smartd[2103]: Configuration file /usr/local/etc/smartd.conf was parsed, found DEVICESCAN, scanning devices Nov 21 01:17:49 maarsy-acq3 smartd[2103]: Device: /dev/pass0, opened Nov 21 01:17:49 maarsy-acq3 smartd[2103]: Device: /dev/pass0, [HGST HUS726T4TAL5204 C40H], lu id: 0x5000cca097502308, S/N: V6HE27MR, 4.00 TB Nov 21 01:17:50 maarsy-acq3 smartd[2103]: Device: /dev/pass0, is SMART capable. Adding to "monitor" list. Nov 21 01:17:50 maarsy-acq3 smartd[2103]: Device: /dev/pass1, opened Nov 21 01:17:50 maarsy-acq3 smartd[2103]: Device: /dev/pass1, [HGST HUS726T4TAL5204 C40H], lu id: 0x5000cca09751d2c8, S/N: V6HEZZZR, 4.00 TB Nov 21 01:17:50 maarsy-acq3 smartd[2103]: Device: /dev/pass1, is SMART capable. Adding to "monitor" list. Nov 21 01:17:50 maarsy-acq3 smartd[2103]: Device: /dev/pass2, opened Nov 21 01:17:50 maarsy-acq3 smartd[2103]: Device: /dev/pass2, [HGST HUS726T4TAL5204 C40H], lu id: 0x5000cca097509ad8, S/N: V6HEA6ZR, 4.00 TB Nov 21 01:17:51 maarsy-acq3 smartd[2103]: Device: /dev/pass2, is SMART capable. Adding to "monitor" list. Nov 21 01:17:51 maarsy-acq3 smartd[2103]: Device: /dev/pass3, opened Nov 21 01:17:51 maarsy-acq3 smartd[2103]: Device: /dev/pass3, [HGST HUS726T4TAL5204 C40H], lu id: 0x5000cca0974f1630, S/N: V6HDHALR, 4.00 TB Nov 21 01:17:51 maarsy-acq3 smartd[2103]: Device: /dev/pass3, is SMART capable. Adding to "monitor" list. Nov 21 01:17:51 maarsy-acq3 smartd[2103]: Device: /dev/pass4, type changed from 'scsi' to 'sat' Nov 21 01:17:51 maarsy-acq3 smartd[2103]: Device: /dev/pass5, type changed from 'scsi' to 'sat' Nov 21 01:17:51 maarsy-acq3 smartd[2103]: Device: /dev/pass6, type changed from 'scsi' to 'sat' Nov 21 01:17:52 maarsy-acq3 smartd[2103]: Device: /dev/pass7, type changed from 'scsi' to 'sat' Nov 21 01:17:52 maarsy-acq3 smartd[2103]: Monitoring 0 ATA/SATA, 4 SCSI/SAS and 0 NVMe devices Nov 21 01:17:53 maarsy-acq3 smartd[2105]: smartd has fork()ed into background mode. New PID=2105. Nov 21 01:17:53 maarsy-acq3 smartd[2105]: file /var/run/smartd.pid written containing PID 2105 So it is monitoring the SAS disks but has ignored the SATA SSDs :( [maarsy-acq3 1:33] ~> camcontrol devlist <HGST HUS726T4TAL5204 C40H> at scbus8 target 8 lun 0 (pass0) <HGST HUS726T4TAL5204 C40H> at scbus8 target 9 lun 0 (pass1) <HGST HUS726T4TAL5204 C40H> at scbus8 target 10 lun 0 (pass2) <HGST HUS726T4TAL5204 C40H> at scbus8 target 11 lun 0 (pass3) <ATA INTEL SSDSC2KB96 0120> at scbus8 target 12 lun 0 (pass4) <ATA INTEL SSDSC2KB96 0120> at scbus8 target 13 lun 0 (pass5) <ATA INTEL SSDSC2KB96 0120> at scbus8 target 14 lun 0 (pass6) <ATA INTEL SSDSC2KB96 0120> at scbus8 target 15 lun 0 (pass7) <Verbatim STORE N GO PMAP> at scbus9 target 0 lun 0 (da0,pass8) If I run smartctl on an SSD I get.. [maarsy-acq3 1:33] ~> sudo smartctl -a /dev/pass4|less smartctl 7.0 2018-12-30 r4883 [FreeBSD 12.0-RELEASE amd64] (local build) Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org Smartctl open device: /dev/pass4 [SAT] failed: SATA device detected, MegaRAID SAT layer is reportedly buggy, use '-d sat' to try anyhow And using what it suggests seems to work - does anyone know a way to force it to work with DEVICESCAN? For now I've just hard coded it like so.. DEFAULT -m root /dev/pass0 /dev/pass1 /dev/pass2 /dev/pass3 /dev/pass4 -d sat /dev/pass5 -d sat /dev/pass6 -d sat /dev/pass7 -d sat but it seems clunky.. also I see these slightly puzzling messages for each SSD.. Nov 21 01:37:08 maarsy-acq3 smartd[3656]: Device: /dev/pass4 [SAT], opened Nov 21 01:37:08 maarsy-acq3 smartd[3656]: Device: /dev/pass4 [SAT], INTEL SSDSC2KB960G8, S/N:PHYF92630636960CGN, WWN:5-5cd2e4-150f430c3, FW:XCV10120, 960 GB Nov 21 01:37:08 maarsy-acq3 smartd[3656]: Device: /dev/pass4 [SAT], found in smartd database: Intel S4510/S4610/S4500/S4600 Series SSDs Nov 21 01:37:08 maarsy-acq3 smartd[3656]: Device: /dev/pass4 [SAT], not capable of SMART Health Status check Nov 21 01:37:08 maarsy-acq3 smartd[3656]: Device: /dev/pass4 [SAT], can't monitor Offline_Uncorrectable count - no Attribute 198 Nov 21 01:37:08 maarsy-acq3 smartd[3656]: Device: /dev/pass4 [SAT], is SMART capable. Adding to "monitor" list. Which I am hoping aren't anything to worry about.. -- Daniel O'Connor "The nice thing about standards is that there are so many of them to choose from." -- Andrew Tanenbaum _______________________________________________ freebsd-stable@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
